Hello !
My name is Chirag, I am a student at the Indian Institute of
Technology (IIT) Delhi. I am currently working on the TI c6211 DSK.
Our aim is to implement and optimise the G.729 and G.723 voice
CODECs on the TI DSP.
The main problem faced by us is that we are not able to get the
simulator for our DSP working. Due to this a lot of our time is
spent unproductively due to the DSP screwing up every now and then.
I have selected the correct configuration in the CCS setup (btw, we
r using the CCS 2) but when i try to load a program on the simulator
I always get an error sayin "Target DSP mismatch". I get a message
saying that the program was not made with the correct RTDX protocol.
I need help with this issue. Can someone pls tell me how I can get
the simulator running and what I need to do to get all my existing
projects running on the simulator....
I need help urgently,
Thanx
Reply by dspnuts●June 13, 20042004-06-13
Chirag,
RTDX config is set-up in BIOS config tool for
the cdb file, under Input/Output -> RTDX -> RTDX Mode. This has
config for Jtag (emulator) or Simulator.
raj
From: Chirag Dadlani
To: c...@yahoogroups.com
Sent: Thursday, June 10, 2004 2:14 PM
Subject: [code-comp] C6211 Simulator... help needed
Hello ! My name is Chirag, I am a student at the
Indian Institute of Technology (IIT) Delhi. I am currently working on the
TI c6211 DSK. Our aim is to implement and optimise the G.729 and G.723
voice CODECs on the TI DSP. The main problem faced by us is that we
are not able to get the simulator for our DSP working. Due to this a lot
of our time is spent unproductively due to the DSP screwing up every now
and then. I have selected the correct configuration in the CCS setup (btw,
we r using the CCS 2) but when i try to load a program on the simulator
I always get an error sayin "Target DSP mismatch". I get a message saying that the program was not made with the correct RTDX protocol.
I need help with this issue. Can someone pls tell me how I can get the
simulator running and what I need to do to get all my existing projects
running on the simulator....
I need help urgently,
Thanx
_____________________________________ Note: If
you do a simple "reply" with your email client, only the author of this message
will receive your answer. You need to do a "reply all" if you want your
answer to be distributed to the entire group.
_____________________________________ About this discussion group:
