Fw: F2811 BIOS startup

Started by Unknown March 3, 2006
I used the revision D of files. But as I know, it is for ccs2.2 and I use
ccs3.1 now. Maybe is it a reason of errors? I have the revision F of the files
too, but It not contains a cdb file. When I open the project, it ask me for some
missing files. 
In the readme file: 
"open error saying it cannot find some library files or BIOS files, etc. 
This is a path dependency issue in CCS, and not a bug.  Just click
"Browse" and then navigate to the file in your tools installation
directory "
Ok, but on my computer, it is not exist any files, like It requires.
There is a textconf file, instead of the cdb, but I can not use it. In manuals,
they write about everything (editing...), but not about running/invoking the
file. (where is: [run textconf file] -button????) How can I make a usable
project (with cdb) from that?

What should I do?

  ----- Original Message ----- 
  From: Design 
  To: Nagy Istv 
  Sent: Friday, March 03, 2006 4:17 AM
  Subject: Re: [code-comp] F2811 BIOS startup
	  can you send me your code in both way so I can try to help you.
    ----- Original Message ----- 
    From: Nagy Istv 
    To: code-comp@code... 
    Sent: Thursday, March 02, 2006 5:40 AM
    Subject: [code-comp] F2811 BIOS startup

    I have a problem with DSP/BIOS initialization in the TMS320F2811.
    If I use my code in a simple C-project, without BIOS, it works, but if I try
to use the same code with BIOS, it don't. It does nothing.
    I have tried a lot of ways, i have used the sample project/codes from the
spra958d appnote. Before that, I have built an own project. My initial project
only handles leds and switches, so when I use BIOS, the leds remain active
(because of the internal pillups) In my init routine, I set the leds off. So it
is shure, that my initialization routine does not run at startup. I invoke it
from main. There was an option in the sample project: call user init function.
There are exist both the user init, and the main.
    I spent some days for that. Another thing: I do not use evalboard, only my
own board.
    why do not run?

    Has anybody any experience like that?

    Istvan Nagy