On Fri, 05 Dec 2008 04:18:07 -0600, "commengr" <communications_engineer@yahoo.com> wrote:>>On Dec 4, 12:23=A0am, "commengr" <communications_engin...@yahoo.com> >>wrote: >>> Hello, this thing has been bothering me for some time and I have not >been >>> able to find a reasonable answer t this. But can you please me what >the >>> term 'j' stands for in the Fourier transform when we multiply our >signal >>> (be it in time or frequency domain) by an imaginary/complex >exponential >>> function. My question is not based on the idea if quadrature signals. >>> >>> Secondly, why cant we use the Laplace and Z-transform instead of >Fourier >>> transform in OFDM, Frequency Domain Equalization etc >> >>Dear... >> >>hope now you got what j means.... >>why do we use j? cos we need it to represent the concise time or >>frequency's two dimensional behaviors. Generally Fourier series or >>transform give you "orthonormal projection matrix" which will divide >>your signal to independent vectors with each component having two >>dimentions. >> >>Laplace, Z and Fourier share some fundamental concepts like >>orthonormal projection but i think FFT is the main idea why we use in >>OFDM because many previous researches have been done to optimize the >>calculation of Fourier Transform ( reducing computational complexity >>while maintaining targeted accuracy ) >> >>with regards, >> > >You are the only one who has answered my question SENSIBILY. Ofcourse I >know what 'j' or 'i' for the matter, means. My question was that what does >it mean as far as signal processing is concerned i.e. how does it effect >our practical signal processing rather than just mathematics.If you knew what it meant then you asked the wrong question. Usenet is not a good interface for mind reading, people can only go by what you actually write down. I still don't know what information you're really looking for. Consider clarifying your question better and you'll get better responses. Garbage in, garbage out. Eric Jacobsen Minister of Algorithms Abineau Communications http://www.ericjacobsen.org Blog: http://www.dsprelated.com/blogs-1/hf/Eric_Jacobsen.php

# meaning of 'j' term in Fourier, Laplace transform

Started by ●December 3, 2008

Reply by ●December 5, 20082008-12-05

Reply by ●December 5, 20082008-12-05

commengr wrote: ...> ========================================================================= > > > I was hoping someone would answer my question SENSIBILY. Of course I know > what 'j' or 'i' for the matter, means.You asked, "... can you please me what the term 'j' stands for in the Fourier transform ..." How come, now, "of course"?> My question was that what does it > mean as far as signal processing is concerned i.e. how does it effect our > practical signal processing rather than just mathematics.Then that is the question you should have asked.> Thanks to the SENSIBLE people who answered my question .... others who > tried to explain it as iota ... imaginary ... are maybe just trying to > increase their posts on this group. Pathetic!It is unwise to bite a hand that tries to feed you. Goodbye.> ==========================================================================Jerry -- Engineering is the art of making what you want from things you can get. �����������������������������������������������������������������������

Reply by ●December 5, 20082008-12-05

commengr wrote:>> On Dec 4, 12:23=A0am, "commengr" <communications_engin...@yahoo.com> >> wrote: > Thanks to the SENSIBLE people who answered my question .... others who > tried to explain it as iota ... imaginary ... are maybe just trying to > increase their posts on this group. Pathetic!What's "sensible"? Are you thanking ME? If so, then you're welcome. Be nice. Be polite. Don't question motives. People here are trying to help you.

Reply by ●December 5, 20082008-12-05

On Dec 5, 4:18 am, "commengr" <communications_engin...@yahoo.com> wrote:> >On Dec 4, 12:23=A0am, "commengr" <communications_engin...@yahoo.com> > >wrote: > >> Hello, this thing has been bothering me for some time and I have not > been > >> able to find a reasonable answer t this. But can you please me what > the > >> term 'j' stands for in the Fourier transform when we multiply our > signal > >> (be it in time or frequency domain) by an imaginary/complex > exponential > >> function. My question is not based on the idea if quadrature signals. > > >> Secondly, why cant we use the Laplace and Z-transform instead of > Fourier > >> transform in OFDM, Frequency Domain Equalization etc > > >Dear... > > >hope now you got what j means.... > >why do we use j? cos we need it to represent the concise time or > >frequency's two dimensional behaviors. Generally Fourier series or > >transform give you "orthonormal projection matrix" which will divide > >your signal to independent vectors with each component having two > >dimentions. > > >Laplace, Z and Fourier share some fundamental concepts like > >orthonormal projection but i think FFT is the main idea why we use in > >OFDM because many previous researches have been done to optimize the > >calculation of Fourier Transform ( reducing computational complexity > >while maintaining targeted accuracy ) > > >with regards, > > You are the only one who has answered my question SENSIBILY. Ofcourse I > know what 'j' or 'i' for the matter, means. My question was that what does > it mean as far as signal processing is concerned i.e. how does it effect > our practical signal processing rather than just mathematics.You could find a previous comp.dsp topic to be helpful. It's titled "Complex Number Tutorial" and began in January of this year. Darol Klawetter

Reply by ●December 14, 20082008-12-14

On Dec 6, 12:22�am, Darol Klawetter <darol.klawet...@l-3com.com> wrote:> On Dec 5, 4:18 am, "commengr" <communications_engin...@yahoo.com> > wrote: > > > > > >On Dec 4, 12:23=A0am, "commengr" <communications_engin...@yahoo.com> > > >wrote: > > >> Hello, this thing has been bothering me for some time and I have not > > been > > >> able to find a reasonable answer t this. But can you please me what > > the > > >> term 'j' stands for in the Fourier transform when we multiply our > > signal > > >> (be it in time or frequency domain) by an imaginary/complex > > exponential > > >> function. My question is not based on the idea if quadrature signals. > > > >> Secondly, why cant we use the Laplace and Z-transform instead of > > Fourier > > >> transform in OFDM, Frequency Domain Equalization etc > > > >Dear... > > > >hope now you got what j means.... > > >why do we use j? cos we need it to represent the concise time or > > >frequency's two dimensional behaviors. Generally Fourier series or > > >transform give you "orthonormal projection matrix" which will divide > > >your signal to independent vectors with each component having two > > >dimentions. > > > >Laplace, Z and Fourier share some fundamental concepts like > > >orthonormal projection but i think FFT is the main idea why we use in > > >OFDM because many previous researches have been done to optimize the > > >calculation of Fourier Transform ( reducing computational complexity > > >while maintaining targeted accuracy ) > > > >with regards, > > > You are the only one who has answered my question SENSIBILY. Ofcourse I > > know what 'j' or 'i' for the matter, means. My question was that what does > > it mean as far as signal processing is concerned i.e. how does it effect > > our practical signal processing rather than just mathematics. > > You could find a previous comp.dsp topic to be helpful. It's titled > "Complex Number Tutorial" and began in January of this year. > > Darol KlawetterYou're right but it was pretty rude the way I got answered at the beginning ... But I also must accept I should have phrased my question better .... THANKS TO ALL THOSE WHO ANSWERED MY QUESTION :)

Reply by ●December 14, 20082008-12-14

On Dec 14, 7:25�pm, communications_engin...@yahoo.com wrote:> On Dec 6, 12:22�am, Darol Klawetter <darol.klawet...@l-3com.com> > wrote: > > > > > On Dec 5, 4:18 am, "commengr" <communications_engin...@yahoo.com> > > wrote: > > > > >On Dec 4, 12:23=A0am, "commengr" <communications_engin...@yahoo.com> > > > >wrote: > > > >> Hello, this thing has been bothering me for some time and I have not > > > been > > > >> able to find a reasonable answer t this. But can you please me what > > > the > > > >> term 'j' stands for in the Fourier transform when we multiply our > > > signal > > > >> (be it in time or frequency domain) by an imaginary/complex > > > exponential > > > >> function. My question is not based on the idea if quadrature signals. > > > > >> Secondly, why cant we use the Laplace and Z-transform instead of > > > Fourier > > > >> transform in OFDM, Frequency Domain Equalization etc > > > > >Dear... > > > > >hope now you got what j means.... > > > >why do we use j? cos we need it to represent the concise time or > > > >frequency's two dimensional behaviors. Generally Fourier series or > > > >transform give you "orthonormal projection matrix" which will divide > > > >your signal to independent vectors with each component having two > > > >dimentions. > > > > >Laplace, Z and Fourier share some fundamental concepts like > > > >orthonormal projection but i think FFT is the main idea why we use in > > > >OFDM because many previous researches have been done to optimize the > > > >calculation of Fourier Transform ( reducing computational complexity > > > >while maintaining targeted accuracy ) > > > > >with regards, > > > > You are the only one who has answered my question SENSIBILY. Ofcourse I > > > know what 'j' or 'i' for the matter, means. My question was that what does > > > it mean as far as signal processing is concerned i.e. how does it effect > > > our practical signal processing rather than just mathematics. > > > You could find a previous comp.dsp topic to be helpful. It's titled > > "Complex Number Tutorial" and began in January of this year. > > > Darol Klawetter > > You're right but it was pretty rude the way I got answered at the > beginning ... But I also must accept I should have phrased my question > better .... > > THANKS TO ALL THOSE WHO ANSWERED MY QUESTION :)You're right but it was pretty rude the way I got answered at the beginning ... But I also must accept I should have phrased my question better .... THANKS TO ALL THOSE WHO ANSWERED MY QUESTION :)