How to transfer data from Tern RA-80 to 21065L Ez-LAB via serial port

Hi all,

I am not quite familiar with 21065L. Now I want to transfer data from
Tern R-Engine-A to SHARC 21065L. Is it possible to achieve it via
RS232 ?

Thank you in advance.

Regards,
Ning

Ning wrote:
> Hi all,
> 
> I am not quite familiar with 21065L. Now I want to transfer data from
> Tern R-Engine-A to SHARC 21065L. Is it possible to achieve it via
> RS232 ?

Application note EE-60 on this webpage

http://www.analog.com/processors/resources/technicalLibrary/appNotes.html

explains how to do this for the ADI 21xx DSP. Perhaps you can modify it 
for the 21065L.

Regards,
Andor

ningsquared@hotmail.com (Ning) wrote in message news:<f6b8d70a.0403152313.2a092e49@posting.google.com>...
> Hi all,
> 
> I am not quite familiar with 21065L. Now I want to transfer data from
> Tern R-Engine-A to SHARC 21065L. Is it possible to achieve it via
> RS232 ?

You have an EzKit Lite? That would be an easy way to achieve what you
want, it has a 16550 UART on board. Or you could attach one to your
design. Or implement it by software, it is explained in EE notes in
ADI website. And of course, including the RS-232 level converters
(MAX-232, for instance)

JaaC

> 
> Thank you in advance.
> 
> Regards,
> Ning