Hi all, Can anyone explain how to generate the stereo and decode it in channel L and R in Matlab. Need some explanation or example please!!! Would appreciate it... Thankz
Generate Stereo using Matlab.
Started by ●November 18, 2009
Reply by ●November 18, 20092009-11-18
disney_snoopy wrote:> Hi all, > > Can anyone explain how to generate the stereo and decode it in channel L > and R in Matlab. Need some explanation or example please!!! Would > appreciate it... > ThankzStudy project / homework? -- Tauno Voipio tauno voipio (at) iki fi
Reply by ●November 18, 20092009-11-18
disney_snoopy wrote:> Hi all, > > Can anyone explain how to generate the stereo and decode it in channel L > and R in Matlab. Need some explanation or example please!!! Would > appreciate it... > Thankz > >?? Generate "the stereo" what? Setting aside semantic niceties, "stereo" audio is just a two-channel audio stream or file (or 2-column matrix, etc), presumed to be sent to two (L/R) front speakers. Nothing to "decode". Richard Dobson
Reply by ●November 18, 20092009-11-18
Richard Dobson wrote:> disney_snoopy wrote: >> Hi all, >> >> Can anyone explain how to generate the stereo and decode it in channel L >> and R in Matlab. Need some explanation or example please!!! Would >> appreciate it... >> Thankz >> >> > > ?? Generate "the stereo" what? Setting aside semantic niceties, "stereo" > audio is just a two-channel audio stream or file (or 2-column matrix, > etc), presumed to be sent to two (L/R) front speakers. Nothing to "decode". > > Richard DobsonMy guess is that he's attempting to simulate the multiplex used on top of a FM radio transmission, including the sub-carrier encoding, i.e. what you get from the FM demodulator. -- Tauno Voipio tauno voipio (at) iki fi
Reply by ●November 18, 20092009-11-18
Tauno Voipio wrote:> Richard Dobson wrote: >> disney_snoopy wrote: >>> Hi all, >>> >>> Can anyone explain how to generate the stereo and decode it in channel L >>> and R in Matlab. Need some explanation or example please!!! Would >>> appreciate it... >>> Thankz >>> >>> >> >> ?? Generate "the stereo" what? Setting aside semantic niceties, >> "stereo" audio is just a two-channel audio stream or file (or >> 2-column matrix, etc), presumed to be sent to two (L/R) front >> speakers. Nothing to "decode". >> >> Richard Dobson > > > My guess is that he's attempting to simulate the > multiplex used on top of a FM radio transmission, > including the sub-carrier encoding, i.e. what you > get from the FM demodulator. >Hadn't thought of that. Perhaps that is an example of a question with 70% of the context assumed? Richard Dobson
Reply by ●November 18, 20092009-11-18
On Nov 19, 3:35�am, Tauno Voipio <tauno.voi...@notused.fi.invalid> wrote:> Richard Dobson wrote: > > disney_snoopy wrote: > >> Hi all, > > >> Can anyone explain how to generate the stereo and decode it in channel L > >> and R in Matlab. Need some explanation or example please!!! Would > >> appreciate it... > >> Thankz > > > ?? Generate "the stereo" what? Setting aside semantic niceties, "stereo" > > �audio is just a two-channel audio stream or file (or 2-column matrix, > > etc), presumed to be sent to two (L/R) front speakers. Nothing to "decode". > > > Richard Dobson > > My guess is that he's attempting to simulate the > multiplex used on top of a FM radio transmission, > including the sub-carrier encoding, i.e. what you > get from the FM demodulator. > > -- > > Tauno Voipio > tauno voipio (at) iki fi- Hide quoted text - > > - Show quoted text -Hi Richard, This is something i was think about. Doing some research before i proposed my project. I read from the DSP e-book and i learn of how to the FM stereo component work... Now i was thinking how to apply to a matlab or mathcad... Is there a way to generate out from the software? such like generate out the output graph that look like the component of FM stereo with the RDS. Is this project valuable to do? Plz comment... Thankz.
Reply by ●November 19, 20092009-11-19
disney_snoopy wrote:> On Nov 19, 3:35 am, Tauno Voipio <tauno.voi...@notused.fi.invalid> > wrote: >> Richard Dobson wrote: >>> disney_snoopy wrote: >>>> Hi all, >>>> Can anyone explain how to generate the stereo and decode it in channel L >>>> and R in Matlab. Need some explanation or example please!!! Would >>>> appreciate it... >>>> Thankz >>> ?? Generate "the stereo" what? Setting aside semantic niceties, "stereo" >>> audio is just a two-channel audio stream or file (or 2-column matrix, >>> etc), presumed to be sent to two (L/R) front speakers. Nothing to "decode". >>> Richard Dobson >> My guess is that he's attempting to simulate the >> multiplex used on top of a FM radio transmission, >> including the sub-carrier encoding, i.e. what you >> get from the FM demodulator. >> >> -- >> >> Tauno Voipio >> tauno voipio (at) iki fi- Hide quoted text - >> >> - Show quoted text - > > Hi Richard, > > This is something i was think about. > Doing some research before i proposed my project. > I read from the DSP e-book and i learn of how to the FM stereo > component work... Now i was thinking how to apply to a matlab or > mathcad... > Is there a way to generate out from the software? such like generate > out the output graph that look like the component of FM stereo with > the RDS. > Is this project valuable to do? > Plz comment... > > Thankz.You did not respond to my question: Homework or study project? -- Tauno Voipio
Reply by ●November 19, 20092009-11-19
On Nov 19, 1:41�pm, Tauno Voipio <tauno.voi...@notused.fi.invalid> wrote:> disney_snoopy wrote: > > On Nov 19, 3:35 am, Tauno Voipio <tauno.voi...@notused.fi.invalid> > > wrote: > >> Richard Dobson wrote: > >>> disney_snoopy wrote: > >>>> Hi all, > >>>> Can anyone explain how to generate the stereo and decode it in channel L > >>>> and R in Matlab. Need some explanation or example please!!! Would > >>>> appreciate it... > >>>> Thankz > >>> ?? Generate "the stereo" what? Setting aside semantic niceties, "stereo" > >>> �audio is just a two-channel audio stream or file (or 2-column matrix, > >>> etc), presumed to be sent to two (L/R) front speakers. Nothing to "decode". > >>> Richard Dobson > >> My guess is that he's attempting to simulate the > >> multiplex used on top of a FM radio transmission, > >> including the sub-carrier encoding, i.e. what you > >> get from the FM demodulator. > > >> -- > > >> Tauno Voipio > >> tauno voipio (at) iki fi- Hide quoted text - > > >> - Show quoted text - > > > Hi Richard, > > > This is something i was think about. > > Doing some research before i proposed my project. > > I read from the DSP e-book and i learn of how to the FM stereo > > component work... Now i was thinking how to apply to a matlab or > > mathcad... > > Is there a way to generate out from the software? such like generate > > out the output graph that look like the component of FM stereo with > > the RDS. > > Is this project valuable to do? > > Plz comment... > > > Thankz. > > You did not respond to my question: Homework or study project? > > -- > > Tauno Voipio- Hide quoted text - > > - Show quoted text -Hi Tauno, Doing some research before i proposed my project. Need to hand in my proposal next week. So was thinking whether to proposed my theoretical as Matlab software solution... Any idea on Matlab? Thankz
Reply by ●November 19, 20092009-11-19
On Nov 19, 1:41�pm, Tauno Voipio <tauno.voi...@notused.fi.invalid> wrote:> disney_snoopy wrote: > > On Nov 19, 3:35 am, Tauno Voipio <tauno.voi...@notused.fi.invalid> > > wrote: > >> Richard Dobson wrote: > >>> disney_snoopy wrote: > >>>> Hi all, > >>>> Can anyone explain how to generate the stereo and decode it in channel L > >>>> and R in Matlab. Need some explanation or example please!!! Would > >>>> appreciate it... > >>>> Thankz > >>> ?? Generate "the stereo" what? Setting aside semantic niceties, "stereo" > >>> �audio is just a two-channel audio stream or file (or 2-column matrix, > >>> etc), presumed to be sent to two (L/R) front speakers. Nothing to "decode". > >>> Richard Dobson > >> My guess is that he's attempting to simulate the > >> multiplex used on top of a FM radio transmission, > >> including the sub-carrier encoding, i.e. what you > >> get from the FM demodulator. > > >> -- > > >> Tauno Voipio > >> tauno voipio (at) iki fi- Hide quoted text - > > >> - Show quoted text - > > > Hi Richard, > > > This is something i was think about. > > Doing some research before i proposed my project. > > I read from the DSP e-book and i learn of how to the FM stereo > > component work... Now i was thinking how to apply to a matlab or > > mathcad... > > Is there a way to generate out from the software? such like generate > > out the output graph that look like the component of FM stereo with > > the RDS. > > Is this project valuable to do? > > Plz comment... > > > Thankz. > > You did not respond to my question: Homework or study project? > > -- > > Tauno Voipio- Hide quoted text - > > - Show quoted text -Is that very important?
Reply by ●November 19, 20092009-11-19
On Nov 19, 2:33�pm, disney_snoopy <disney_sno...@hotmail.com> wrote:> On Nov 19, 1:41�pm, Tauno Voipio <tauno.voi...@notused.fi.invalid> > wrote: > > > > > > > disney_snoopy wrote: > > > On Nov 19, 3:35 am, Tauno Voipio <tauno.voi...@notused.fi.invalid> > > > wrote: > > >> Richard Dobson wrote: > > >>> disney_snoopy wrote: > > >>>> Hi all, > > >>>> Can anyone explain how to generate the stereo and decode it in channel L > > >>>> and R in Matlab. Need some explanation or example please!!! Would > > >>>> appreciate it... > > >>>> Thankz > > >>> ?? Generate "the stereo" what? Setting aside semantic niceties, "stereo" > > >>> �audio is just a two-channel audio stream or file (or 2-column matrix, > > >>> etc), presumed to be sent to two (L/R) front speakers. Nothing to "decode". > > >>> Richard Dobson > > >> My guess is that he's attempting to simulate the > > >> multiplex used on top of a FM radio transmission, > > >> including the sub-carrier encoding, i.e. what you > > >> get from the FM demodulator. > > > >> -- > > > >> Tauno Voipio > > >> tauno voipio (at) iki fi- Hide quoted text - > > > >> - Show quoted text - > > > > Hi Richard, > > > > This is something i was think about. > > > Doing some research before i proposed my project. > > > I read from the DSP e-book and i learn of how to the FM stereo > > > component work... Now i was thinking how to apply to a matlab or > > > mathcad... > > > Is there a way to generate out from the software? such like generate > > > out the output graph that look like the component of FM stereo with > > > the RDS. > > > Is this project valuable to do? > > > Plz comment... > > > > Thankz. > > > You did not respond to my question: Homework or study project? > > > -- > > > Tauno Voipio- Hide quoted text - > > > - Show quoted text - > > Is that very important?- Hide quoted text - > > - Show quoted text -If the best i will proposed my theoretical software as MathCad... But well im not that good in Mathcad so i choosed Matlab.