Hi, I have real data from a radar like range and azimuth, and I want to find the Center of Mass Correlation that it is correlation process to perform a Plot Extraction sometimes called Hit processing. I found this in the page http://www.radartutorial.eu/10.processing/sp13.en.html but I don't know if I have to perform a correlation or autocorrelation for this data. thanks a lot.
Doubt about autocorrelation
Started by ●October 12, 2006
Reply by ●October 15, 20062006-10-15
My reading of the page is that a correlation operation is not required for the "Center of Mass Correlation" so thats not a problem. It looks like for each azimuth, the centers of the range cells that have detections are averaged. Then the averaged range values from the azimuths are averaged to give the location of the target. In article <2uWdneRK65OCqrPYnZ2dnUVZ_vmdnZ2d@giganews.com>, "psoto" <pwilsoto1@yahoo.com.mx> wrote:>Hi, I have real data from a radar like range and azimuth, and I want to >find the Center of Mass Correlation that it is correlation process to >perform a Plot Extraction sometimes called Hit processing. I found this in >the page >http://www.radartutorial.eu/10.processing/sp13.en.html >but I don't know if I have to perform a correlation or autocorrelation for >this data. > >thanks a lot. > > >