DVB-H OFDM matlab Question

Started by idan82 March 13, 2007
I am working on simulating DVB-H 4k mode according to ETSI standard.
According to the standard i am populating 3024 data carriers with QPSK. I
am trying to validate the simulation by measuring the BER before Vit&RS
decoding and comparing to standard Eb/No qpsk curves. The problem is that
I am using the MATLAB AWGN function with SNR from 0to12dB and the flag
'measured'. I would like to know how to translate this to Eb/No so I can
compare to the known QPSK theoretical curves, or if there is a better way
to validate the simulation.
Thank you.