Forums

SCI with two stop bits, is possible ?

Started by Unknown January 20, 2003
I'm using 56805, and I'm trying to set the SCI with two stop bits. As
mentioned in table 12.2 of family manual it seems possible but is doesn't
work! Does anyone have experience with this SCI set ?
Thanks
Giuliano


RE: [motoroladsp] SCI with two stop bits, is possible ?

I think what it means is that if you set it up for 9 bits, no parity, then you can always set the ninth bit for an extra stop bit???

Jerry.

-----Original Message-----
From: g...@qem.it [mailto:g...@qem.it]
Sent: Monday, January 20, 2003 1:45 AM
To: m...@yahoogroups.com
Subject: [motoroladsp] SCI with two stop bits, is possible ?


I'm using 56805, and I'm trying to set the SCI with two stop bits. As
mentioned in table 12.2 of family manual it seems possible but is doesn't
work! Does anyone have experience with this SCI set ?
Thanks
Giuliano


_____________________________________
Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer.  You need to do a "reply all" if you want your answer to be distributed to the entire group.

_____________________________________
About this discussion group:

To Join:  m...@yahoogroups.com

To Post:  m...@yahoogroups.com

To Leave: m...@yahoogroups.com

Archives: http://www.yahoogroups.com/group/motoroladsp

More Groups: http://www.dsprelated.com/groups.php3
 

" TARGET="_blank">http://docs.yahoo.com/info/terms/



________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service. For more information visit http://www.messagelabs.com
________________________________________________________________________


________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service. For more information visit http://www.messagelabs.com
________________________________________________________________________