|
The Motorola ap note AN1933 references TMRC2_CTRL (in figure 5-5) bit 6 which it calls "Count repeatedly" and suggests setting it to 0 (in order to only count once). The data sheet for the 56F807 calls this bit "Count Once" and says that setting it to 0 will count repeatedly. Does anyone know which is correct? Thanks, Gary |
|
|
AN1933 timer question
Started by ●April 14, 2003
Reply by ●April 15, 20032003-04-15
|
Hi Gary, The bit works as described in the Users Manual. 0 = Count Repeatedly. 1 = Count Once. Have a Good One! Pete --- In , "bergy50us" <forthprgrmr@h...> wrote: > The Motorola ap note AN1933 references TMRC2_CTRL (in figure 5-5) bit > 6 which it calls "Count repeatedly" and suggests setting it to 0 (in > order to only count once). > The data sheet for the 56F807 calls this bit "Count Once" and says > that setting it to 0 will count repeatedly. > Does anyone know which is correct? > > Thanks, Gary |
