Hello, DSP56F807 has 4 timers modules. Each timers modules countains 4 counter/timer groups. Each counter/timer group has capture register which is loaded when an input change (depends of the capture mode in Status an Control register). Apparently, the 4 capture registers of the 4 counter/timer groups of a timer are loaded whatever the inputs which change. It is possible to assign input 1 to capture of counter/timer group 1, input 2 to capture of counter/timer group 2, etc.. ? Thanks you. |
DSP56F807 : Capture registers of timers
Started by ●July 18, 2003