do Ineed to use a timer if using the SPI as a slave?

You don't need to use timer. SPI slave will send data out synchronously during receive from master. Make sure that you have data written into Tx register. You may also try to use Processor Expert SPI test application to get some level of confidence.

Sincerely,

Leonard N. Elevich

-----Original Message-----
From: TA1T [mailto:c...@hotmail.com]
Sent: Monday, November 17, 2003 1:01 PM
To: m...@yahoogroups.com
Subject: [motoroladsp] do Ineed to use a timer if using the SPI as a slave?

I am using the SPI module on the dsp56f827 as a slave. It reads data

on the MOSI but doesnt send anything back to the master on the

MISO.Do i need to use a quad timer at all. if so WHY,and what

frequency should i set the timer to?

------------------------ Yahoo! Groups Sponsor ---------------------~-->

Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark

Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.

http://www.c1tracking.com/l.asp?cidU11

http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/PNArlB/TM

---------------------------------~->

_____________________________________

Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer.  You need to do a "reply all" if you want your answer to be distributed to the entire group.

_____________________________________

About this discussion group:

To Join:  m...@yahoogroups.com

To Post:  m...@yahoogroups.com

To Leave: m...@yahoogroups.com

Archives: http://www.yahoogroups.com/group/motoroladsp

More Groups: http://www.dsprelated.com/groups.php3