Set COP timeout to the minimum, enable it and let it run away. It will cause
a soft reset and then it starts with boot code. Georg Bende Softwareentwickler Abteilung Elektronik Dr. Fritz Faulhaber GmbH & Co KG Daimlerstr. 23 71101 Schaich Tel: +49 7031 638294 > -----Ursprgliche Nachricht----- > Von: Lionel Degoutte [mailto:] > Gesendet: Dienstag, 2. Dezember 2003 16:33 > An: yahoo dsp56f807 > Betreff: [motoroladsp] DSP56F807 reboot to bootloader > Hello, > I use SDK 3.0 and cw 5.1. > I want ,with a command to the serial interface, to reboot the > DSP to the > program bootloader. If I do > asm (jsr archStart), the DSP reboot but not to the > bootloader. How can I do > ? > > Thank you > > Lionel > > ------------------------ Yahoo! Groups Sponsor > ---------------------~--> > Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark > Printer at MyInks.com. Free s/h on orders $50 or more to the > US & Canada. > http://www.c1tracking.com/l.asp?cidU11 > http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/PNArlB/TM > -------------------------- > -------~-> > > _____________________________________ > Note: If you do a simple "reply" with your email client, only > the author of this message will receive your answer. You > need to do a "reply all" if you want your answer to be > distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: > > To Post: > > To Leave: > > Archives: http://www.yahoogroups.com/group/motoroladsp > > More Groups: http://www.dsprelated.com/groups.php3 > ">http://docs.yahoo.com/info/terms/ > |
AW: DSP56F807 reboot to bootloader
Started by ●December 2, 2003