Forums

DSP56858EVM, CW6.0 & SDK2.0E

Started by thisalfkatz March 4, 2004
Have just received my EVM, copy of CW6.0 (patched to 6.0.1) and
SDK2.0E. Following th instructions in the targetting manual, I get
to 1.2.4 Step 3 (execute a buildall on the SDK). Now I get loads of
errors (e.g. multiply defined symbols), and then the build grinds to
a halt compileing one of the security modules. The Motorola site
says I need CW2.0E, the FAE says that CW6.0 replaced that and I can't
get V2.0E anymore. Has anyone else experienced this problem? Is
there a workaround?

The tools work well isolated from the SDK, I got an application
running flashing some leds from interrupts and from a background task.

Any help in getting the SDK up and running would be appreciated.

Cheers,
Alf Katz



I tried to send a file "nos.zip" to m...@yahoogroups.com to help t...@yahoo.com  but that site would not accept it due to file size.  If any one else wants a copy, please let me know.

Kenneth Ciszewski <k...@swbell.net> wrote:
I had a similar problem trying to get the audio CODEC driver to work.  Attached are files I was sent to help this problem, along with instructions on where to install them in SDK.

thisalfkatz <t...@yahoo.com.au> wrote:
Have just received my EVM, copy of CW6.0 (patched to 6.0.1) and
SDK2.0E.  Following th instructions in the targetting manual, I get
to 1.2.4 Step 3 (execute a buildall on the SDK).  Now I get loads of
errors (e.g. multiply defined symbols), and then the build grinds to
a halt compileing one of the security modules.  The Motorola site
says I need CW2.0E, the FAE says that CW6.0 replaced that and I can't
get V2.0E anymore.  Has anyone else experienced this problem?  Is
there a workaround?

The tools work well isolated from the SDK, I got an application
running flashing some leds from interrupts and from a background task.

Any help in getting the SDK up and running would be appreciated.

Cheers,
Alf Katz


_____________________________________
Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer.  You need to do a "reply all" if you want your answer to be distributed to the entire group.

_____________________________________
About this discussion group:

To Join:  m...@yahoogroups.com

To Post:  m...@yahoogroups.com

To Leave: m...@yahoogroups.com

Archives: http://www.yahoogroups.com/group/motoroladsp

More Groups: http://www.dsprelated.com/groups.php3