Hi, I am working with SDK3.0 and CW6.0. I have the big problem of not having the premium features that come with SDK3.0 The CAN Driver is a premium feature. Is there a workaround for this, short of creating my own drivers for (open, write/read, ioctl and interrupts)? As for doing assembly, I wouldn't know where to begin on CAN. Does anyone have an example they could post that doesn't use this expensive premium feature? Sincerely, -James |
|
CAN Functionality Options for DSP56F804EVM
Started by ●March 12, 2004
Reply by ●March 12, 20042004-03-12
Hi, check dsplib (you can donwload it from http://sourceforge.net/projects/dsp56800) there is simple implementation in assmbly for CAN configuration, TX and RX. You won't be able to compile it in CW without changes, but you can use it as an inspiration and copy-paste relevant parts. Jan On Fri, Mar 12, 2004 at 02:11:24AM -0000, jamessconnors wrote: > Hi, > > I am working with SDK3.0 and CW6.0. I have the big problem of not > having the premium features that come with SDK3.0 The CAN Driver is a > premium feature. Is there a workaround for this, short of creating my > own drivers for (open, write/read, ioctl and interrupts)? As for > doing assembly, I wouldn't know where to begin on CAN. > > Does anyone have an example they could post that doesn't use this > expensive premium feature? > > Sincerely, > -James > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: > > To Post: > > To Leave: > > Archives: http://www.yahoogroups.com/group/motoroladsp > > More Groups: http://www.dsprelated.com/groups.php3 > > Yahoo! Groups Links > > |