I'm
setting up a production line and need to be able to FLASH my boards (DSP56F803)
without the operator having to be in the CW application.
All we are
flashing is a custom version of the serial boot loader that works over RS485, so
it's small and I know I could use the free version of CW, but I'm
trying to reduce complexity on the line.
I'm
setting up a production line and need to be able to FLASH my boards (DSP56F803)
without the operator having to be in the CW application.
All we are
flashing is a custom version of the serial boot loader that works over RS485, so
it's small and I know I could use the free version of CW, but I'm
trying to reduce complexity on the line.
Thanks in
advance for any suggestions.
Jacob
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group:
Reply by Hutchings William-p23437●March 23, 20042004-03-23
Jacob
-
You can
use the flash_over_jtag application to do this. This is a open source program
that is command line driven and uses the parallel port command converter
connected to the JTAG port. You can find this program on the SPS FAQ site and it
is also included on our training CDs. Thanks.
-
Bill
General Business InformationMotorola Internal Use OnlyMotorola Confidential
ProprietaryPersonal
Memorandum
-----Original Message----- From: Jacob Christ
[mailto:j...@pontech.com] Sent: Tuesday, March 23, 2004 11:38 AM To: Motoroladsp Subject: [motoroladsp] JTAG Programing
I'm setting up a production line and need to be able to FLASH my
boards (DSP56F803) without the operator having to be in the CW
application.
All we are flashing is a
custom version of the serial boot loader that works over RS485, so it's
small and I know I could use the free version of CW, but I'm trying to
reduce complexity on the line.
Thanks in advance for any
suggestions.
Jacob
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group:
Thanks to everyone for the advice, but I can't for
the life of me find the flash_over_jtag application anywhere on the sps
site.
Jacob
From: Jacob Christ [mailto:j...@pontech.com]
Sent: Tuesday, March 23, 2004 10:38 AM To:
Motoroladsp Subject: [motoroladsp] JTAG Programing
I'm
setting up a production line and need to be able to FLASH my boards (DSP56F803)
without the operator having to be in the CW application.
All we are
flashing is a custom version of the serial boot loader that works over RS485, so
it's small and I know I could use the free version of CW, but I'm
trying to reduce complexity on the line.
Thanks in
advance for any suggestions.
Jacob
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group:
Here's something that took us a little
while to figure out: To use flash_over_jtag you need to configure your CW to
generate S-records with a maximum line length of 80 characters, sort by address,
and DOS end-of-line characters. Those options are found in CW under: Edit,
YourProjectName Settings, Linker.
Doug
----- Original Message -----
From: Jacob Christ
To: Motoroladsp
Sent: Tuesday, March 23, 2004 12:37 PM
Subject: [motoroladsp] JTAG Programing
I'm
setting up a production line and need to be able to FLASH my boards (DSP56F803)
without the operator having to be in the CW application.
All we are
flashing is a custom version of the serial boot loader that works over RS485, so
it's small and I know I could use the free version of CW, but I'm
trying to reduce complexity on the line.
Thanks in
advance for any suggestions.
Jacob
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group:
Reply by Roberto Bonacina●March 24, 20042004-03-24
Messaggio
Just follow the link
http://e-www.motorola.com/webapp/sps/site/faq_search.jsp ; put 19703 as
keyword search, then submit the query. The first of two results is the one of
your interest. In fact, the link given by Douglas doesn't
bring you directly to the FAQ19703, but only in the main search
page.
Roberto
-----Messaggio originale----- Da:
Jacob Christ [mailto:j...@pontech.com] Inviato: marted23 marzo
2004 23.32 A: 'Motoroladsp' Oggetto: RE:
[motoroladsp] JTAG Programing
Thanks to everyone for the advice, but I can't for
the life of me find the flash_over_jtag application anywhere on the sps
site.
Jacob
From: Jacob Christ [mailto:j...@pontech.com]
Sent: Tuesday, March 23, 2004 10:38 AM To:
Motoroladsp Subject: [motoroladsp] JTAG Programing
I'm
setting up a production line and need to be able to FLASH my boards (DSP56F803)
without the operator having to be in the CW application.
All we are
flashing is a custom version of the serial boot loader that works over RS485, so
it's small and I know I could use the free version of CW, but I'm
trying to reduce complexity on the line.
Thanks in
advance for any suggestions.
Jacob
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group:
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group:
On the FAQ page select "Digital Signal
Processors", then "56800/E Family", then "DSP56F805" for the product. Search for
"flash_over_jtag". You'll get 2 hits. Click on the one for DSP56F80x. It
takes you to a page with a brief description, source code, executable code, free
compilers if you choose source code, and documentation.
----- Original Message -----
From: Jacob Christ
To: 'Motoroladsp'
Sent: Tuesday, March 23, 2004 4:31 PM
Subject: RE: [motoroladsp] JTAG Programing
Thanks to everyone for the advice, but I can't for
the life of me find the flash_over_jtag application anywhere on the sps
site.
Jacob
From: Jacob Christ [mailto:j...@pontech.com]
Sent: Tuesday, March 23, 2004 10:38 AM To:
Motoroladsp Subject: [motoroladsp] JTAG Programing
I'm
setting up a production line and need to be able to FLASH my boards (DSP56F803)
without the operator having to be in the CW application.
All we are
flashing is a custom version of the serial boot loader that works over RS485, so
it's small and I know I could use the free version of CW, but I'm
trying to reduce complexity on the line.
Thanks in
advance for any suggestions.
Jacob
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group:
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group:
