Forums

AW: On board programing of DSP56F801

Started by Bende Georg June 13, 2005
For the programming there is the excellent Flash Over JTAG utility from Mr. Malik, you can get it from the Freescale website.
The 56F800 series don't have a code protection possibility; you should use the 56F800E series.

BR,
Georg Bende > -----Ursprgliche Nachricht-----
> Von: motoroladsp@moto...
> [mailto:motoroladsp@moto...] Im Auftrag von haoyeshen
> Gesendet: Samstag, 11. Juni 2005 00:59
> An: motoroladsp@moto...
> Betreff: [motoroladsp] On board programing of DSP56F801 > Hi:
>
> I am trying to learn how to program 56F801 when the device is
> assembled
> on board.
>
> Also, I am wondering how I could protect the code inside the
> device so
> that no one could read it via JTAG or other ports.
>
> Thanks for the help >
> ------------------------ Yahoo! Groups Sponsor
> --------------------~-->
> In low income neighborhoods, 84% do not own computers.
> At Network for Good, help bridge the Digital Divide!
> http://us.click.yahoo.com/EpW3eD/3MnJAA/cosFAA/PNArlB/TM
> --------------------------
> ------~- >
>