Forums

56F827 ADC SYNC

Started by Papa__J August 6, 2002
I have been unable to find much information regarding the connection
of the quad timer modual to the ADC sync input in the 826/827 users
manual. Specificaly, I was trying to discover if an exernal source
could be used to trigger the ADC SYNC (I don't think so). Also, is
this SYNC always tied to timer A0 or can is be synced from other
timers.

Thanks,

Jacob




See attached application note. It is written for DSP56F80X processors but it
may help you with DSP56F827.

Leonard

-----Original Message-----
From: Papa__J [mailto:]
Sent: Tuesday, August 06, 2002 9:19 AM
To:
Subject: [motoroladsp] 56F827 ADC SYNC

I have been unable to find much information regarding the connection
of the quad timer modual to the ADC sync input in the 826/827 users
manual. Specificaly, I was trying to discover if an exernal source
could be used to trigger the ADC SYNC (I don't think so). Also, is
this SYNC always tied to timer A0 or can is be synced from other
timers.

Thanks,

Jacob _____________________________________
Note: If you do a simple "reply" with your email client, only the author of
this message will receive your answer. You need to do a "reply all" if you
want your answer to be distributed to the entire group.

_____________________________________
About this discussion group:

To Join:

To Post:

To Leave:

Archives: http://www.yahoogroups.com/group/motoroladsp

More Groups: http://www.dsprelated.com/groups.php3 ">http://docs.yahoo.com/info/terms/


Attachment (not stored)
an1933.pdf
Type: application/pdf

Thanks for sending that big attachment to everyone on the mail-list!
We appreciate your well placed intentions but I really didn't needed another
334kb of junk mail... could you send it direct to the person that needs it
next time?
thanks,
Mark Harrison.

> -----Original Message-----
> From: Leonard N. Elevich [mailto:]
> Sent: Wednesday, August 07, 2002 8:05 AM
> To: Papa__J;
> Subject: RE: [motoroladsp] 56F827 ADC SYNC > See attached application note. It is written for DSP56F80X
> processors but it
> may help you with DSP56F827.
>
> Leonard
>
> -----Original Message-----
> From: Papa__J [mailto:]
> Sent: Tuesday, August 06, 2002 9:19 AM
> To:
> Subject: [motoroladsp] 56F827 ADC SYNC
>
> I have been unable to find much information regarding the connection
> of the quad timer modual to the ADC sync input in the 826/827 users
> manual. Specificaly, I was trying to discover if an exernal source
> could be used to trigger the ADC SYNC (I don't think so). Also, is
> this SYNC always tied to timer A0 or can is be synced from other
> timers.
>
> Thanks,
>
> Jacob