Forums

PCMaster problem

Started by Unknown April 13, 2006
Hi all,
Im programming the 56F803 and Im using PCMaster to see the DSPs
variables, but there's a problem: most time, the DSP doesn't transmit
anything (I saw that in the oscilloscope). Can somebody help me?
Thanks a lot.

Francisco S.
Sorry, I wasn't clear. I meant: I'm treating to see the program's global
variables when the program is running in the DSP.
Besides, I have noted that the problem occurs more often when the
program's loop is bigger. Could be that the DSP, in that case, have no
recourses to transmit to the PCMaster?
Thank again,

F. Salom.
-----Mensaje original-----
De: Charlie W [mailto:c...@yahoo.com]
Enviado el: Viernes, 14 de Abril de 2006 02:44 p.m.
Para: Francisco Salom; m...
Asunto: Re: [motoroladsp] PCMaster problem

Do you mean both "programming the 56F803 flash" and
"PCMaster to see the DSPs variables' occured at the
same time? If it is true, you cannot see any
activities on SCI port because CPU did not run during
flash programming.
C.W.

Do you mean both "programming the 56F803 flash" and
"PCMaster to see the DSPs variables' occured at the
same time? If it is true, you cannot see any
activities on SCI port because CPU did not run during
flash programming.
C.W.
--- Francisco Salom wrote:

> Hi all,
> Im programming the 56F803 and Im using
> PCMaster to see the DSPs
> variables, but there's a problem: most time, the
> DSP doesn't transmit
> anything (I saw that in the oscilloscope). Can
> somebody help me?
> Thanks a lot.
>
> Francisco S.
>
>
I think you run out resource.

Charlie W.

--- Francisco Salom wrote:

> Sorry, I wasn't clear. I meant: I'm treating to see
> the program's global
> variables when the program is running in the DSP.
> Besides, I have noted that the problem occurs more
> often when the
> program's loop is bigger. Could be that the DSP, in
> that case, have no
> recourses to transmit to the PCMaster?
> Thank again,
>
> F. Salom.
> -----Mensaje original-----
> De: Charlie W [mailto:c...@yahoo.com]
> Enviado el: Viernes, 14 de Abril de 2006 02:44 p.m.
> Para: Francisco Salom; m...
> Asunto: Re: [motoroladsp] PCMaster problem
>
> Do you mean both "programming the 56F803 flash" and
> "PCMaster to see the DSPs variables' occured at the
> same time? If it is true, you cannot see any
> activities on SCI port because CPU did not run
> during
> flash programming.
> C.W.
>
__________________________________________________