Any body got any sample code for setting up the
pwm registers and controlling the duty cycle.
Have been working on this for three nights and
havent had any success.
Thanks
Joe
Reply by Leonard Elevich●December 7, 20012001-12-07
What Motorola
DSP are you using? If you are using any of the DSP56F80X parts, Motorola
provides many code examples in the DSP56800 SDK. You can download SDK from the
following location:
-----Original
Message----- From: joemccarr
[mailto:j...@yahoo.com] Sent: Thursday, December 06, 2001
6:48 PM To: m...@yahoogroups.com Subject: [motoroladsp] PWM
Hello,
Any body got any sample code for setting up the pwm registers and controlling the duty cycle. Have been working on this for three nights and havent had any success.
Thanks Joe _____________________________________ Note: If you do a simple "reply" with your email client, only the
author of this message will receive your answer. You need to do a
"reply all" if you want your answer to be distributed to the entire
group.
_____________________________________ About this discussion group: