Forums

DSP56F803 Data/Adress Bus... Mounting LCD & Clocking

Started by wpethe January 2, 2002
Hi,

I would like to interface a LCD with the Data bus an the Controler
System. The LCD has an 8bit interface (data bus) and Pins for
Enable (High for Access)
Register Select (Data Register / Instruction Register)
Read Write Direction (Low for Write from DSP to RAM/ High for Read
from RAM)

How can I interface these pins with the DSP in an easy way?

Which Frequency is CLKO at the Data Bus?
The LCD needs Puls width > 140 ns for Data Bus and the other pins.

Thanks for help

W.