yatin,
I think the code will need to:
--enable the appropriate interrupt
--enable global interrupts
--configure the interrupt source
--include a interrupt handler for the desired interrupt
--set the appropriate vector in the interrupt table to point to the interrupt
handler
--The interrupt handler needs to clear the appropriate interrupt flag
--re-enable the appropriate interrupt.
I do not know how much of the above is already handled by the code.
R. Williams
---------- Original Message -----------
From: y...@hotmail.com
To: c...
Sent: Sat, 30 Apr 2011 20:26:55 -0400
Subject: [c6x] Not able to see the Interrupt from HOST:TMS320C6412
> I am using TMS320C6412. We are using the PCI DSP
driver code from
> valley technology as base to develop our DSP firmware. Currently we
> are evaluating valley tech. PCI DSP firmware. We found that even
> though we are setting HOSTSW interrupt from HOST we don't see
> interrupt getting handled in the DSP code.
>
> Any pointers on what might be going wrong? Or please let us know the
> required steps for the host->dsp interrupt.
>
> Thanks,
> -Yatin
------- End of Original Message -------
_____________________________________