On Wed, 20 Mar 2002, it was written: > I'm also working with the AD14060 Quad SHARC. The interrupt vector table > for each ADSP-21060 resides in its own internal memory, at 0x20000 for each. as per my knowled > The Multiprocessor Boot options are discussed in the ADI's ADSP-2106x SHARC > User's Manual Chapter 11 (System Design). One master SHARC can boot the > others (the H/W setup is described). There are other options; such booting > from a Host, boot via the link port and all SHARCs boot in turn from a > single EPROM (the option I'm using). > > Analog Devices provides three ADSP-21060 boot loaders with VisualDSP++ that > support link host or EPROM booting for multiprocessors (I've had to rewrite > the boot loader meet our POST and other system requirements). > > I recommend reading the User's Manual, especially chapters 5 (Memory), 7 > (Multiprocessing) and 11 (System Design) and the following Engineer To > Engineer notes (EE-56, EE-107, EE-108) provided by Analog Devices. I found > these to be extremely helpful. > > http://www.analog.com/library/applicationNotes/dsp/32_devTools/ee_107.pdf > http://www.analog.com/library/applicationNotes/dsp/32_devTools/EN108.pdf > http://www.analog.com/library/applicationNotes/dsp/32_Processors/ee_56.pdf > Regards, > > Don Waldron > > > -----Original Message----- > > From: Harshad S Dave [SMTP:] > > Sent: Wednesday, March 20, 2002 5:09 AM > > To: adsp > > Subject: [adsp] @ QUAD SHARC > > > > > > > > Hi all > > > > Does anybody has worked on Quad Sharc ( ADSP-14060)? > > > > I want to know that how(at what address) interrupt vector table of each > > sharc are mapped > > also How can we boot other sharcs from the master sharc > > > > thanking you all > > > > > > Harshad > > SAMEER,IITB > > > > > > > > > > > > > > > > _____________________________________ > > Note: If you do a simple "reply" with your email client, only the author > > of this message will receive your answer. You need to do a "reply all" if > > you want your answer to be distributed to the entire group. > > > > _____________________________________ > > About this discussion group: > > > > To Join: Send an email to > > > > To Post: Send an email to > > > > To Leave: Send an email to > > > > Archives: http://groups.yahoo.com/group/adsp > > > > Other Groups: http://www.dsprelated.com/groups.php3 > > > > > > ">http://docs.yahoo.com/info/terms/ > > > |