Swapnali,
The easiest way to load a file without an emulator is through the serial
port.
1. create the out file that you want to load.
2. run it through the TI utility hex6x which will create a simple ASCII
file containing addresses and the data to be loaded at those addresses [see TI
help file for details].
3. <optional> If you have a large file, you may want to write a
script that will simply convert the ASCII to binary/hex [I have heard that TI
was going to put ths option in hex6x, but it is not in the version that I have
loaded]. This will probably double the load speed.
4. now all you need is a simple program to read the serial port and
interpret the data according to the file format [hex6x ascii or hex].
debug it and program it into FLASH.
mikedunn
Swapnali Patil <s...@intelli-vision.com> wrote:
Swapnali Patil <s...@intelli-vision.com> wrote:
Hello Mike,my target board is EVMDM642. I am sending you the bolck diagram of EVMDM642 , I knidly request you to go through it, & suggest me the way out.waiting for the replyThanx & Regardsswapnaliswapnali,The important question is... "what is your target board??"does it have a serial port on it??does it have FLASH memory??,mikedunn
swapnali patil <s...@yahoo.com> wrote:Hi All!i have a query , Can i download the code on target Board with out using the Emulator , is it through Serial port then which Driver Software will be needed for it?thanx in advanceswapnali