Hello,
Are you using ADSP-21xx (16 bit, fixed point) or ADSP-21xxx (aka SHARC, 32 bit,
floating point)??
In the former case, you should not use the JTAG based ICEs, but the so called
218x EzICE, which has a serial port connection.
Please clarify what are you exaclty using, so you can get better advice from the
list.
Regards.
Jaime Andr Aranguren Cardona
j...@ieee.org
j...@computer.org
----- Original Message ----
From: sathish chandra
To: a...
Sent: Tuesday, May 13, 2008 8:02:15 AM
Subject: [adsp] problem in JTAG connection
Hi All
I am working with the ADSP21xx Processor and trying to connect with the
Hardware.
But unable to connect.
1) I am doing ICE test. In the ICE test i am getting Error.
The Error is : Determining the scan path length is failed
Message is : No JTAG device detected in the scan path. Check target
power & verify JTAG signal Integrty
May i know Wether it is JTAG problem or The target problem.
Thanks in Advance
Regards
sathish