Hello Upendra
Extrapolating from the Processor Expert bean, I got this initialization
code (with a 15 MHz cpu clock) for 57600 baud, 8 data bits, 1 stop bit,
no parity, no interrupts:
/* SCI0_SCICR:
LOOP=0,SWAI=0,RSRC=0,M=0,WAKE=0,POL=0,PE=0,PT=0,TEIE=0,TIIE=0,RFIE=0,REI
E=0,TE=1,RE=1,RWU=0,SBK=0 */
setReg(SCI0_SCICR,12); /* Set the SCI configuration */
setReg(SCI0_SCIBR,16); /* Set prescaler bits */
(write 0 to SCISR to clear all error flags)
On 11.06.2005, at 07:42, upendra mahida wrote:
> Hi
> I am upendra
> i am using now new dsp 56f8367 for communication
> i am not getting communication any one can suggest me initialization
> i have enabled Per reg and scisr,scicr,scibr
> and ai am reading tdre flag but it is not communicating
>
> Regards
> Upendra
>
>
> Too much spam in your inbox?
>
> NEW! You can now post a message or access and search the archives of
> this group on DSPRelated.com:
> http://www.dsprelated.com/groups/motoroladsp/1.php
>
> _____________________________________
> Note: If you do a simple "reply" with your email client, only the
> author of this message will receive your answer. You need to do a
> "reply all" if you want your answer to be distributed to the
entire
> group.
>
> _____________________________________
> About this discussion group:
>
> Archives: http://www.dsprelated.com/groups/motoroladsp/1.php
>
> To Post: Send an email to motoroladsp@moto...
>
> Other DSP Related Groups: http://www.dsprelated.com/groups.php
> Yahoo! Groups Links
> To
>