Slavko (@eslavko)
The table does low pass filtering and decimation! and for precission required I need at least 14 bits if I'm correct.Y(14bit)= lookup( Y(14bit):X(8bit) )So I take...
Hello..As you said I want to eliminate analog stuff as I can capture data digitally. As I say I can receive data synchronous and that part work's well. I was tried...
I take 1MHz sampling rate as the modulator running in that frequency, and I can got the clock line too so I do synchronous sampling. (the data and clock are transmitted...
Hello...I try to clarify a little bit.I have 50Hz (distorted sine) signal that are converted to delta sigma signal at 1MHz bit clock. The digital data is passed...
It's not voltage analyzer. I only capture data from other circuit and need to measure voltage to do some callibartion process.I do have old board with just RC filter...
The sampling is at 1MHz. And I wish to average 5 periods of 50Hz. So I should got result every 100ms.
Use this form to contact eslavko
Before you can contact a member of the *Related Sites:
- You must be logged in (register here)
- You must confirm you email address
