DSPRelated.com

(@Gerard123)


I have complications implementing the range-azimuth with the 2D Music algorithm. I have used the URA-azimuth to find the reflected signal by the elevation angles...
Hi Sir, thank you for your suggestion and attention. The data I shared are only angle-profile collected after signal pre-processing and beamforming of targets position...
Hi Mr, sorry for the late reply. You can check out the result showing two peaks of AoA after beamforming. Now, I want to plot two-dimensional peaks and view them...
Hi Sir, Sorry for being late. Here are my conventional beamforming code and figures. First I performed the pre-processing of my signal and later applied the MVDR...
Sorry, I was talking about the reshaping of the data in multiple dimensions. Because when I refer to the idea where I randomly generate the transmitted signal and...
Currently, my assumption focuses on the point where the number of  sources is` M = 2` representing  `2 static persons`  facing the smartphone. And therefore,...
Indeed yes Sr, I use real data. However, after collecting the data, several pre-processing methods are applied for the signal denoising and extract some features,...
First of all, thank you Mr @weetabixharry for your feedback. I tested the sharing code and it works well. However, I have a small issue, let's consider the assumption...
Hi all, I'm trying to calculate the AoA and DOA of the received signals according to the Music method. And strangely, the final answer gives me the result in the...

Use this form to contact Gerard123

Before you can contact a member of the *Related Sites:

  • You must be logged in (register here)
  • You must confirm you email address