(@kam_lime)
Hi Jeff,First off, I just want to say thank you so much for taking the time to help inform a novice like me!In the post above that I wrote, I meant there would be...
Hi Jeff,I'm sorry, I'm confused. If by output you mean volume output, then the amp allows me to individually adjust volume for each speaker, so all 15 speakers can...
Hi Jeff,I'm sorry to bother you again, but if I had 5 left speakers, 5 middle speakers, and 5 right speakers, and I had 3 inputs to the dsp (left, middle, and right),...
Sounds good, thanks!The speaker company for the ceiling speakers (tweeter and woofer with passive crossover) I ordered says the frequency response is 40 Hz - 22...
Do you think there will be sound arrival issues with this room that is 75' x 40' x 14'?Also, if it's worth mentioning, I have passive crossover built-in between...
Right. I wasn't expecting great results. I wanted to see if I could obtain solid results. I realize that what qualifies as "solid" is very subjective, but I wanted...
High pass filter is a good idea. The following sentence may really show how much of a novice I am with dsps, but the one thing I absolutely don't want is some high-pitched...
The speakers will be used for music. Occasionally, there will be a microphone input for speeches, but this situation doesn't have to be optimized. Regardless of...
If it matters, the ballroom is 75' x 40' x 14'. If the speakers were completely spread out evenly, then there would be 6
rows of speakers, with 4 speakers in each...
Hi Jeff,Unfortunately, I won't be able to have more than 1 output. There are 5 rows, with 4 speakers in each row. None of the speakers are down the middle (naturally,...
I'm sorry, I did a poor job of explaining my full situation.I have an HTD whole-house system, with 4 zones (1 ballroom with 20 speakers [5 rows of 4 speakers], 3...
Use this form to contact kam_lime
Before you can contact a member of the *Related Sites:
- You must be logged in (register here)
- You must confirm you email address
