Hi!
I want to connect the digital camera and LCD to LVDS Link Ports of the TS201
EZ-KIT Lite. Does sombody know how to do that? Unfortunately, I haven't
found the suitable information in Internet.
Many Thanks
connecting camera and LCD to TS201 EZ-KIT Lite
Started by ●June 25, 2009
Reply by ●June 26, 20092009-06-26
On Thu, 25 Jun 2009, o...@mail.ru wrote:
> Hi!
>
> I want to connect the digital camera and LCD to LVDS Link Ports of the
>TS201 EZ-KIT Lite. Does sombody know how to do that? Unfortunately, I
>haven't found the suitable information in Internet.
I've connected LVDS between a camera and an FPGA, but not a link port. So
long as you can send the clock on one of the LVDS pairs your life is
pretty easy. You set up one pair for clock and one pair for data - but
some LCD's use multiple LVDS pairs so you'll have to see how the link port
supports it.
Noise is a serious problem - make sure your path lengths are fairly equal
and well shielded.
If you can't send the clock along with the data, life is more difficult
:-)
Patience, persistence, truth,
Dr. mike
> Hi!
>
> I want to connect the digital camera and LCD to LVDS Link Ports of the
>TS201 EZ-KIT Lite. Does sombody know how to do that? Unfortunately, I
>haven't found the suitable information in Internet.
I've connected LVDS between a camera and an FPGA, but not a link port. So
long as you can send the clock on one of the LVDS pairs your life is
pretty easy. You set up one pair for clock and one pair for data - but
some LCD's use multiple LVDS pairs so you'll have to see how the link port
supports it.
Noise is a serious problem - make sure your path lengths are fairly equal
and well shielded.
If you can't send the clock along with the data, life is more difficult
:-)
Patience, persistence, truth,
Dr. mike
