Ahmet-
> I created Code Composer Srudio project to receive
voice from
> C6711 dsk input using dynamic microphone .If I use standart
> PC microphone ,I can't receive voice.How can I change AD535
> codec settings to use standart PC microphone? Is
> TMS320C6711 Dsk suitable for standart PC microphone?
PC microphones tend to be cheap "electret" or condenser type that need some
power
(voltage), which is typically provided by the motherboard sound circuitry (or
sound
card).
I don't recall the DSK C6711 has a mic input... I think it has one line-in
input and
one telephony input. So you might have to figure out a way to get some power to
the
PC mic you want to use, or stick with the dynamic mic (typically
independently
powered, for example a battery). Also, according to the AD535 sheet:
http://focus.ti.com/lit/ds/symlink/tlc320ad535.pdf
you can set gain for the input amplifiers to 20 dB... maybe that would help.
-Jeff
_____________________________________
Re: Voice receiving with standart PC microphone using TMS320C6711 Dsk
Started by ●June 3, 2009