I am working on a real-time DSP in which three DSK kits each connected with a PC
and signal processing will be done on DSK kits.Each DSK kit also will be
connected with each other then data will be send from one DSK kit to another DSK
kit and result will be diplay in MATLAB running on PCs. How can we connect three
DSK kits with each other? Do i will need daughter cards for connecting each DSK
kit ? Which cable do i will need to connect DSK kits ?
Can anybody refer me some good ebooks on DSK C6713 kit or any stuff on this kit
because i am not familiar with DSK kit c6713 at all only I have little bit
experience...
need help regarding DSK c6713 kit
Started by ●February 20, 2011
Reply by ●February 20, 20112011-02-20
G.M.
You could go here:
When you follow a link on that page, you will get to here:
where you will find links to all the info about the DSK c6713, including manual,
schematic, etc.
I just looked at the board schematics.
I think the aic23 codex will be the a usable way for you to communicate between
boards.
R. Williams
---------- Original Message -----------
From: "G.M Laghari"
To: c6713 DSK
Sent: Sun, 20 Feb 2011 02:24:42 -0800 (PST)
Subject: [c6x] need help regarding DSK c6713 kit
> I am working on a real-time DSP in which three DSK kits each connected
> with a PC and signal processing will be done on DSK kits.Each DSK kit
> also will be connected with each other then data will be send from one
> DSK kit to another DSK kit and result will be diplay in MATLAB running
> on PCs. How can we connect three DSK kits with each other? Do i will
> need daughter cards for connecting each DSK kit ? Which cable do i
> will need to connect DSK kits ?
>
> Can anybody refer me some good ebooks on DSK C6713 kit or any stuff on
> this kit because i am not familiar with DSK kit c6713 at all only I
> have little bit experience...
------- End of Original Message -------
_____________________________________
You could go here:
When you follow a link on that page, you will get to here:
where you will find links to all the info about the DSK c6713, including manual,
schematic, etc.
I just looked at the board schematics.
I think the aic23 codex will be the a usable way for you to communicate between
boards.
R. Williams
---------- Original Message -----------
From: "G.M Laghari"
To: c6713 DSK
Sent: Sun, 20 Feb 2011 02:24:42 -0800 (PST)
Subject: [c6x] need help regarding DSK c6713 kit
> I am working on a real-time DSP in which three DSK kits each connected
> with a PC and signal processing will be done on DSK kits.Each DSK kit
> also will be connected with each other then data will be send from one
> DSK kit to another DSK kit and result will be diplay in MATLAB running
> on PCs. How can we connect three DSK kits with each other? Do i will
> need daughter cards for connecting each DSK kit ? Which cable do i
> will need to connect DSK kits ?
>
> Can anybody refer me some good ebooks on DSK C6713 kit or any stuff on
> this kit because i am not familiar with DSK kit c6713 at all only I
> have little bit experience...
------- End of Original Message -------
_____________________________________
