Hello all,
I am working on "hello world application of ndk 2.0 on DM648". This
board(DM648) has two ethernet ports on it. This application (hello world)has a
feature that it takes data from its one port and passes it to the other one
(like a switch).The problem is VLAN Tagged packets are not forwarded by the code
even though i have enabled the Rx_VLAN field . I need ur valuable suggestions to
resolve the issue.
Thanks & Regards
Ahmed
_____________________________________
VLAN Tagged packets not forwarded by DM648
Started by ●April 22, 2011
Reply by ●April 22, 20112011-04-22
ahmed,
do you have the source code for the helloworld application?
If you have the source code , then fixing the problem should be easy
If you have the source code and have problems debugging, then send the code
along and we'll take a look.
R. Williams
---------- Original Message -----------
From: a...@yahoo.com
To: c...
Sent: Fri, 22 Apr 2011 13:49:22 -0400
Subject: [c6x] VLAN Tagged packets not forwarded by DM648
> Hello all,
> I am working on "hello world application of ndk 2.0 on
> DM648". This board(DM648) has two ethernet ports on it. This
> application (hello world)has a feature that it takes data from its one
> port and passes it to the other one (like a switch).The problem is
> VLAN Tagged packets are not forwarded by the code even though i have
> enabled the Rx_VLAN field . I need ur valuable suggestions to resolve
> the issue.
>
> Thanks & Regards
> Ahmed
------- End of Original Message -------
_____________________________________
do you have the source code for the helloworld application?
If you have the source code , then fixing the problem should be easy
If you have the source code and have problems debugging, then send the code
along and we'll take a look.
R. Williams
---------- Original Message -----------
From: a...@yahoo.com
To: c...
Sent: Fri, 22 Apr 2011 13:49:22 -0400
Subject: [c6x] VLAN Tagged packets not forwarded by DM648
> Hello all,
> I am working on "hello world application of ndk 2.0 on
> DM648". This board(DM648) has two ethernet ports on it. This
> application (hello world)has a feature that it takes data from its one
> port and passes it to the other one (like a switch).The problem is
> VLAN Tagged packets are not forwarded by the code even though i have
> enabled the Rx_VLAN field . I need ur valuable suggestions to resolve
> the issue.
>
> Thanks & Regards
> Ahmed
------- End of Original Message -------
_____________________________________