--- On Wed, 27/4/11, ahmed wrote:
From: ahmed
Subject: Re: [c6x] VLAN Tagged packets not forwarded by DM648
To: "Richard Williams"
Date: Wednesday, 27 April, 2011, 10:48 AM
Richard,
The issue has been resolved, changing the VLAN ENCAP bit in CPSW switch and
changing the maximum trasmit unit size has resolved the issue.
Thanku very much for ur concern
Regards
Ahmed
--- On Sat, 23/4/11, Richard Williams wrote:
From: Richard Williams
Subject: Re: [c6x] VLAN Tagged packets not forwarded by DM648
To: a...@yahoo.com, c...
Date: Saturday, 23 April, 2011, 6:11 AM
ahmed,
do you have the source code for the helloworld application?
If you have the source code , then fixing the problem should be easy
If you have the source code and have problems debugging, then send the code
along and we'll take a look.
R. Williams
---------- Original Message -----------
From: a...@yahoo.com
To: c...
Sent: Fri, 22 Apr 2011 13:49:22 -0400
Subject: [c6x] VLAN Tagged packets not forwarded by DM648
> Hello all,
> I am working on "hello world application of ndk 2.0 on
> DM648". This board(DM648) has two ethernet ports on it. This
> application (hello world)has a feature that it takes data from its one
> port and passes it to the other one (like a switch).The problem is
> VLAN Tagged packets are not forwarded by the code even though i have
> enabled the Rx_VLAN field . I need ur valuable suggestions to resolve
> the issue.
>
> Thanks & Regards
> Ahmed
------- End of Original Message -------
Fw: Re: VLAN Tagged packets not forwarded by DM648
Started by ●April 27, 2011
