Hi guys
My project is “control a dc motor by DSP TMS320C6713B DSK.
First of all, I just need to know that how the A/D & D/A & PWM output
&…Of this starter kit works?
Cuz I didn’t find anything about “how to work with these stuffs" in
its technical Ref.
Do I have to use an external A/D & D/A & …, or the kit itself has them???
(for instance ADS 8382)
but the most important thing is that,I borrow this board from my university so I
can't change it or buy something else.
thank u all.
_____________________________________
dc motor by DSP TMS320C6713B DSK
Started by ●August 31, 2011
Reply by ●August 31, 20112011-08-31
mymetro,
On 8/31/2011 3:34 AM, m...@gmail.com wrote:
> Hi guys
> My project is “control a dc motor by DSP TMS320C6713B DSK.
> First of all, I just need to know that how the A/D& D/A& PWM output&…Of this starter kit works?
> Cuz I didn’t find anything about “how to work with these stuffs" in its technical Ref.
> Do I have to use an external A/D& D/A& …, or the kit itself has them??? (for instance ADS 8382)
The 6713 DSK is not the best kit for motor control. You can probably
coerce it to work.
1. I do not think that it has a PWM output - but you can do it in sw and
output on the D/A.
2. The kit has low level A/D and D/A - you will need to add driver
circuitry or look into a motor control driver card - I do not know if
one exists.
3. If you are required to control a specific motor, or if you select a
motor, be sure that the understand all of the components before you buy
or build one component.
4. There is a wealth of motor control info [hardware and software] on
TI's website. It will be under microcontrollers [ARM, 24x, and 28x].
mikedunn
>
> but the most important thing is that,I borrow this board from my university so I can't change it or buy something else.
> thank u all.
>
>
>
> _____________________________________
_____________________________________
On 8/31/2011 3:34 AM, m...@gmail.com wrote:
> Hi guys
> My project is “control a dc motor by DSP TMS320C6713B DSK.
> First of all, I just need to know that how the A/D& D/A& PWM output&…Of this starter kit works?
> Cuz I didn’t find anything about “how to work with these stuffs" in its technical Ref.
> Do I have to use an external A/D& D/A& …, or the kit itself has them??? (for instance ADS 8382)
The 6713 DSK is not the best kit for motor control. You can probably
coerce it to work.
1. I do not think that it has a PWM output - but you can do it in sw and
output on the D/A.
2. The kit has low level A/D and D/A - you will need to add driver
circuitry or look into a motor control driver card - I do not know if
one exists.
3. If you are required to control a specific motor, or if you select a
motor, be sure that the understand all of the components before you buy
or build one component.
4. There is a wealth of motor control info [hardware and software] on
TI's website. It will be under microcontrollers [ARM, 24x, and 28x].
mikedunn
>
> but the most important thing is that,I borrow this board from my university so I can't change it or buy something else.
> thank u all.
>
>
>
> _____________________________________
_____________________________________
