trigger an Event

Hi Aziz,

There is a toolbox in matlab to do that. Matlab can actually control your DSK thru CCS. You can open a project in CCS from matlab, load the out file onto dsk, insert a breakpoint and then read/write to dsp memory and do all kinds of thing you want thru matlab.
In your specific case you can insert a breakpoint in your code thru matlab and then ask ur processor to read in some flag from its memory and do a particular task. This is just one of the way that I am familiar with and I hav been sucessfully using it. May be there are more ways and trust me its amazing way to control the DSP processor

You may want to have a look at this website:

http://www.mathworks.com/products/ccslink/

Hope this helps.

Tarang On Tue, 17 Feb 2004 Aizezi Abuding wrote :
>
>  Hi C6x,
>  Is there any method to trigger an event and to do some specific task
> from other applications, such as Matlab, while the application running ?
>Anybody has an experience?
>  Any idea will be highly appreciated. Thanks in advance ?
>  Regards / Aziz >_____________________________________
>Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer.  You need to do a "reply all" if you want your answer to be distributed to the entire group.
>
>_____________________________________
>About this discussion group:
>
>To Join:  Send an email to c...@yahoogroups.com
>
>To Post:  Send an email to c...@yahoogroups.com
>
>To Leave: Send an email to c...@yahoogroups.com
>
>Archives: http://www.yahoogroups.com/group/c6x
>
>Other Groups: http://www.dsprelated.com
>
>Yahoo! Groups Links
>
><*> To visit your group on the web, go to:
>      http://groups.yahoo.com/group/c6x/
>
><*> To unsubscribe from this group, send an email to:
>      c...@yahoogroups.com
>
><*