Hi, I am using 6713 DSK with code composer studio 2.2. I want to install XDAIS developers kit (SPRC116) version 2.51.00 but I am receiving the following messages. First the installators warns me that the installer will remove Tamplate Code Generator. When I accept it and aceept the licence as well then it the installation aborts claiming that: "Setup has not found any valid products to update. Your system may already be up to date or you are attempting to install a serial update out of sequence." There is certainly no XDAIS developers kit in my versio of code composer. Any idea how to install it? -- Best regards, Nikodem |
|
XDAIS developer's kit (SPRC116) installation problems
Started by ●June 19, 2004
Reply by ●June 22, 20042004-06-22
Probably it is problem with trying to install the latest XDIAS kit on older version of CCS. Try intalling the latest patch of CCS (2.21.XX). Go to Help->Update Advisor->Check for Updates and rest should be easy. Regards Piyush --- Nikodem Binienda <> wrote: > Hi, > > I am using 6713 DSK with code composer studio 2.2. > I want to install XDAIS developers kit (SPRC116) > version 2.51.00 but > I am receiving the following messages. > > First the installators warns me that the installer > will remove > Tamplate Code Generator. When I accept it and > aceept the licence as > well then it the installation aborts claiming > that: > > "Setup has not found any valid products to update. > Your system may > already be up to date or you are attempting to > install a serial > update out of sequence." > > There is certainly no XDAIS developers kit in my > versio of code > composer. Any idea how to install it? > > -- > Best regards, > Nikodem > > > ------------------------ Yahoo! Groups Sponsor > --------------------~--> > Make a clean sweep of pop-up ads. Yahoo! Companion > Toolbar. > Now with Pop-Up Blocker. Get it for free! > http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/26EolB/TM > --------------------------------~-> > > > _____________________________________ > Note: If you do a simple "reply" with your email > client, only the author of this message will receive > your answer. You need to do a "reply all" if you > want your answer to be distributed to the entire > group. > > _____________________________________ > About this discussion group: > > To Join: > > To Post: > > To Leave: > > Archives: http://www.yahoogroups.com/group/code-comp > > More Groups: http://www.dsprelated.com > > Yahoo! Groups Links > > ===== ************************************** And---"A blind Understanding!" Heav'n replied. Piyush Kaul http://www.geocities.com/piyushkaul __________________________________ |