On Mon, 16 Jan 2006 abhishek.nema@abhi... wrote:
> hello
>
> i am facing one problem regarding the sweep waves generation from the sine
generator.
> actually the sweep waves are continous sine wave with varing
frequencies.
>
> but the problem is when the frequency changes the amplitude also
changes.
Do you have a filter section that shouldn\'t be on, but is?
Otherwise, there shouldn\'t be a gain change.
Patience, persistence, truth,
Dr. mike
Re: regarding sweep generator
Started by ●January 16, 2006
Reply by ●January 23, 20062006-01-23
Hello,
You should take a look into the help of the bean into the section
Typical usage.
Click with the right button on the ADC bean and select 'Help' command.
Then click on the 'Typical usage' button in the left column. This page
offers several examples of usage of the ADC bean.
best regards
Petr Hradsky
Processor Expert Support Team
UNIS
--- In motoroladsp@moto..., C. Rodolfo Ramez
<ramirezrodo@y...> wrote:
>
> Hi, im working recently with a 56f8323, using PE. Im trying to
configurate the ADC to acquire through it, but i couldnt do it. I
would need some code or help to learn how to configurate it. Thanks.
> Regards
>
> Rodolfo (from Argentina)
>
You should take a look into the help of the bean into the section
Typical usage.
Click with the right button on the ADC bean and select 'Help' command.
Then click on the 'Typical usage' button in the left column. This page
offers several examples of usage of the ADC bean.
best regards
Petr Hradsky
Processor Expert Support Team
UNIS
--- In motoroladsp@moto..., C. Rodolfo Ramez
<ramirezrodo@y...> wrote:
>
> Hi, im working recently with a 56f8323, using PE. Im trying to
configurate the ADC to acquire through it, but i couldnt do it. I
would need some code or help to learn how to configurate it. Thanks.
> Regards
>
> Rodolfo (from Argentina)
>