On what platform do you wish to run the GSM 06.10 algorithm?
Dave
s...@yahoogroups.com wrote:
------------------------ Yahoo! Groups Sponsor
--------------------~--> Make a clean sweep of pop-up ads. Yahoo!
Companion Toolbar. Now with Pop-Up Blocker. Get it for free! http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/GP4qlB/TM --------------------------------~->
There are 2 messages in
this issue.
Topics in this digest:
1. GSM algorithm From: "ben_psxtreme" 2. Re: GSM algorithm From: "Phil
Frisbie, Jr."
________________________________________________________________________ ________________________________________________________________________
Message: 1 Date: Fri, 25 Jun 2004 08:14:02 -0000 From:
"ben_psxtreme" Subject: GSM algorithm
Hi everybody
!
I am a student achieving an
internship in a mobile network company. They have asked me to realize a
GSM compression software. The best solution, looking at the hard piece of
knowledge required to do everything from scratch, was to find a free code
source on the web.
I was then really happy to find Jutta
DEgener's source code, on this website. http://kbs.cs.tu-berlin.de/~jutta/toast.html
However, I still have
some difficulties to understand it quite well. And I thus have some
questions. (My, THAT is an introduction ;-)
To summarize my problems
: it does not work. After having looked in the code, I believe that the
header is not taken in account. I have not found a specific way to take
care of it, only 160 samples being processed again and again. I have
added my own code to add the header, but the sound is awful. It is
impossible to recognize the original file.
I have tested the
exectuable found on the website, but I did not manage to make
one working, even with different files...
As you can see, I am pretty
stuck, and probably not as skilled as I would like to. If you have good
suggestions to me, I would be really pleased !
Thanks a lot
Ben
________________________________________________________________________ ________________________________________________________________________
Message: 2 Date: Fri, 25 Jun 2004 11:19:11 -0700 From: "Phil
Frisbie, Jr." Subject: Re: GSM algorithm
ben_psxtreme
wrote:
> Hi everybody ! > > I am a student
achieving an internship in a mobile network company. > They have asked
me to realize a GSM compression software. The best > solution, looking
at the hard piece of knowledge required to do > everything from
scratch, was to find a free code source on the web. > > I was
then really happy to find Jutta DEgener's source code, on this
> website. > http://kbs.cs.tu-berlin.de/~jutta/toast.html > > However, I still have some difficulties to understand it quite
well. > And I thus have some questions. (My, THAT is an introduction
;-) > > To summarize my problems : it does not work. After
having looked in
Please explain "it does not work".
>
the code, I believe that the header is not taken in account. I have >
not found a specific way to take care of it, only 160 samples being >
processed again and again. > I have added my own code to add the header,
but the sound is awful. > It is impossible to recognize the original
file. > > I have tested the exectuable found on the website,
but I did not > manage to make one working, even with different
files... > > As you can see, I am pretty stuck, and probably
not as skilled as I > would like to. If you have good suggestions to
me, I would be really
> pleased !
I have a cleaned up and easier to use version of
GSM 6.10 included in my free library HawkVoiceDI. You can download it from
my site below.
> Thanks a lot > > Ben
-- Phil Frisbie, Jr. Hawk Software http://www.hawksoft.com
________________________________________________________________________ _____________________________________________________________________________________________________________ Note: If you do a simple "reply" with your email client, only the author of
this message will receive your answer. You need to do a "reply all" if you want
your answer to be distributed to the entire group.
_____________________________________ About this discussion group:
To Join: s...@yahoogroups.com
To Post:
s...@yahoogroups.com
To Leave: s...@yahoogroups.com
Archives:
http://www.yahoogroups.com/group/speechcoding
Other DSP-Related
Groups: http://www.dsprelated.comYahoo! Groups Links
<*> To
visit your group on the web, go to: http://groups.yahoo.com/group/speechcoding/
<*> To
unsubscribe from this group, send an email to: s...@yahoogroups.com
<*
|