All- We're using Clock_getTicks() BIOS API to profile code. Results do not match cycle counts by a factor of 10: about 50 sec vs....

All- We're using Clock_getTicks() BIOS API to profile code. Results do not match cycle counts by a factor of 10: about 50 sec vs. expectation of 5 sec (cycle counts determined by looking at generated .asm). We're using CCS 4.2, BIOS6, and EVM C6472. All code and data is in onchip RAM, the only interrupt enabled is TIMER0 for BIOS. A few questions: 1) Is there any reason not to use B...

Hello All, I had been working on Lyrtech DM648. Now I hv made my customized board by considering Original Schematics, The problem is,...

Hello All, I had been working on Lyrtech DM648. Now I hv made my customized board by considering Original Schematics, The problem is, I am unable to write/read any data in its NOR flash. The only anomaly b/w schematics is the removal of MUX that swiches control between video ports and Flash, as I am not using the video ports so I hv removed the MUX and made a direct connection of flas...

Hi Jeff, > Subject: efficient C64x+ code generation and DDOTPL2 instruction > Posted by: "Jeff Brower" jbrower@ jbrower888 > Date: Mon...

Hi Jeff, > Subject: efficient C64x+ code generation and DDOTPL2 instruction > Posted by: "Jeff Brower" jbrower@ jbrower888 > Date: Mon Oct 4, 2010 7:36 pm ((PDT)) > > > pg 2-25 of spru198i.pdf mentions Compiler Intrinsic > > long long _ddotpl2(long long src1_o:src1_e, uint src2); > > I've seen that... but I think with intrinsics we're still unable to > reach the same level of performan

Hello all, I have made my customized board from Lyrtech DM648, The actual DM648 has Magjag (SI-50080-F)gigabit connector for Ethernet, According...

Hello all, I have made my customized board from Lyrtech DM648, The actual DM648 has Magjag (SI-50080-F)gigabit connector for Ethernet, According to my requirement (i.e only 100Mbps) I have replaced it with 0813-1X1T-57-F that is a 100Mbps POE connector. I have made necessary hardware configuration of Marvell (PHY IC). Upon plugging the jack, 100Mbps link was successfully established ... but after ...

---------- Forwarded Message ----------- From: "Richard Williams" To: c6x@yahoogroups Sent: Thu, 16 Sep 2010 00:34:19 -0700 Subject: Re:...

---------- Forwarded Message ----------- From: "Richard Williams" To: c6x@yahoogroups Sent: Thu, 16 Sep 2010 00:34:19 -0700 Subject: Re: [c6x] Searching in header files in CCS4 Jiggu, per the bug fix list in CCS 4, this problem: SDSCM00033482 ALL Eclipse IDE S2 - Major When I reight-click a definition and select "open definition" nothing happens.

Hi All, I just migrated to CCS4. I've been trying the regular search function (Navigate-> Search) when header files are not in the project...

Hi All, I just migrated to CCS4. I've been trying the regular search function (Navigate-> Search) when header files are not in the project folder but the path is referenced in the Include options. Even with the file name pattern specifically set to .h and the Scope set to workspace, the search function doesn't seem to search in the header files. If I try to create a working set the open projec

Today, I downloaded and installed CCS v4.2, the latest version TI provides. I was able to create a project with DSP/BIOS 5.x support, then add a...

Today, I downloaded and installed CCS v4.2, the latest version TI provides. I was able to create a project with DSP/BIOS 5.x support, then add a TCF file to it and configure it to run a periodic task. For exazmple, on memory watch, I was able to see the value of a variable incremented periodically. Now, I have another question. I see that the latest BIOS version is 6.3, so I want to use that.. ...

Hi everyone, Does any one know if i can boot from Flash inside x28 series Delfino floating point DSP. I need to save real estate for my design....

Hi everyone, Does any one know if i can boot from Flash inside x28 series Delfino floating point DSP. I need to save real estate for my design. I would like to use Delfino for my design if i do not have to use External Flash for booting. Thanks Sankar _____________________________________

I am using CCS v4.0.2 and a EVM C6472 board. I am trying to create a DSP/BIOS project that will have a periodic task running. As a starter, I'd...

I am using CCS v4.0.2 and a EVM C6472 board. I am trying to create a DSP/BIOS project that will have a periodic task running. As a starter, I'd like to see some message repeatedly displayed in the "console" part of CCS. I was able to get messages to display with a printf on the "FPGA LED test" sample project, for example. However, that project is not a DSP/BIOS project. So, after creating a "Hell...

> Subject: genAIS.pl and TMS320C6424 > Posted by: "Kemenes Robert" roby_kem > Date: Mon Sep 6, 2010 9:31 am ((PDT)) > > Hi to all. >...

> Subject: genAIS.pl and TMS320C6424 > Posted by: "Kemenes Robert" roby_kem > Date: Mon Sep 6, 2010 9:31 am ((PDT)) > > Hi to all. > > Is the genAIS tool same for all C6000 family? Perhaps not. I've seen quite a few scripts, which are all of different sizes. TI has an App Note that you might find helpful: Using the TMS320C642x Bootloader (Rev. A) http://focus.ti.com/dsp/docs/litabs