Hi all, I made some modifications to dsk_app now only acquire data (I delete the transmit configuration for EDMA and all references in code), the...

Hi all, I made some modifications to dsk_app now only acquire data (I delete the transmit configuration for EDMA and all references in code), the idea is only acquire and process that data. Here is a copy of the code that make the trouble and a more detailed explanation. void edmaHwi(void) { static Uint32 pingOrPong = PING; // Ping-pong state variable static Int16 rcvdone = 0; ...

Samir, It looks like you replied to a power supply question and contaminated the thread. Hopefully, this will start a new one. see...

Samir, It looks like you replied to a power supply question and contaminated the thread. Hopefully, this will start a new one. see comments below. On Wed, Jul 28, 2010 at 12:12 PM, Michael Dunn wrote: > ---------- Forwarded message ---------- > From: Samir Bendoukha > Date: Wed, Jul 28, 2010 at 10:15 AM > Subject: Re: [c6x] C6747 Core Power Supply

Hello everyone, I am trying to design a board around the C6747, which requires 1.2V for the core. Can anyone suggest a good and simple power...

Hello everyone, I am trying to design a board around the C6747, which requires 1.2V for the core. Can anyone suggest a good and simple power supply configuration for that. Any help will be appreciated. _____________________________________

Hello I am using Simulink to access code composer studio, and then it writes directly my code to access the DSP board. What is the default...

Hello I am using Simulink to access code composer studio, and then it writes directly my code to access the DSP board. What is the default sampling rate for the board? I think it's too small for my application and I want to modify it an 96 Khz. How can I modify it using Matlab Simulink or Code Composer Studio? The problem is that all my files are generated automatically by simulink and I don't kn...

Hello everyone, I was using DM648 from Lyrtech, Now I am trying to make my custom board for a specific application in which Marvell Alaska...

Hello everyone, I was using DM648 from Lyrtech, Now I am trying to make my custom board for a specific application in which Marvell Alaska (MAC/PHY) IC is being used. This is a user programmable IC, Do anybody the programmer and the way to program it? Thanks & regards Ahmed _____________________________________

Hello, I need to connect the TMS320"6416" DSK to the Virtex-5 FPGA. In order to do that I need to know the *IO functionalites of the DSK....

Hello, I need to connect the TMS320"6416" DSK to the Virtex-5 FPGA. In order to do that I need to know the *IO functionalites of the DSK. * **Can anyone kindly suggest any manuals or documents to go about before programming the EMIF on the DSK. Programming examples will be of great help to me. Do I also need to learn about GPIO ?? Thanks, -- Varun

Hi Guys, I have been stuck with this FFT stuff since long and still I am unable to verify the result. I am simply using dsk_app.c project...

Hi Guys, I have been stuck with this FFT stuff since long and still I am unable to verify the result. I am simply using dsk_app.c project for C6713 board and implementing DSPLIB function DSPF_sp_cfftr2_dit to compute 1024 point FFT over 1024 complex pairs of input. I am going to explain over all steps which has been a part of my implementation. Please have a look if I am wrong any ...

Hello All, I am making my custom board using TM320DM648EVM, Do I need to change gel file for it? or the gel provided by TI with their...

Hello All, I am making my custom board using TM320DM648EVM, Do I need to change gel file for it? or the gel provided by TI with their Kit (TMS320DM648)will work equally fine with my board. Thanks & Regards Ahmed _____________________________________

ITS- > Hi, I have a question about TMS320DM642 EMIF related ibis simulation. > Previously I designed a DSP board with TMS320C6713 and all of...

ITS- > Hi, I have a question about TMS320DM642 EMIF related ibis simulation. > Previously I designed a DSP board with TMS320C6713 and all of its > simulations with SDRAM went perfectly ok. > > However when I performed the ibis simulation for a newer board, using > TMS320DM642 EMIF with Micron Technology MT48LC4M32B2 SDRAM, I get some > non-monotonic rise and fall waveform over the data p

Manoj- First, please post to the list, not to me. > ... but at > the end of the processing of image am not able to free the > allocated...

Manoj- First, please post to the list, not to me. > ... but at > the end of the processing of image am not able to free the > allocated memory by using free.the call to free is hanging Second, suggest to show very short C code with: -one call to allocate_imagememory() -one call to free() Otherwise it's hard to guess what is your bug. -Jeff > i made the below change in