DSPRelated.com
Forums
   Forums    More Forums    imagedsp  

Wiener in frequency domain.

Started by dmitry_vag ●April 5, 2005


Hi all.
I am new in DSP, and have a misunderstanding related to Wiener
filtration.
I have both source and desired signals (actually images) available.
As I understand, when Wiener filter is calculated in spatial domain
(straightforwardly or approximated using LMS) with predefined filter
size, it is a FIR filter.
But if it is calculated in frequency domain using H(w)=Pxy(w)/Pxx(w),
is it a IIR filter?

Thanks.

Reply by b_pa...@yahoo.com ●September 27, 20052005-09-27

Hi ,
Conversion of a filter from time domain to frequency domain is not going to change the entire properties.If Wiener is FIR and in frequency it is IIR the stability of the filter becomes questionable.
But any way if you look at the Wiener filter it is a FIR filter in both domains.
-Bob



You might also like... (promoted content)
The 2024 Embedded Online Conference - Register Early and Save with Promo Code ER2024!
The 2024 Embedded Online Conference - Register Early and Save with Promo Code ER2024!
The 2024 Embedded Online Conference - Register Early and Save with Promo Code ER2024!