Connecting EVM to CCStudio v4.x

Started by faya...@gmail.com in TMS320c55x8 years ago 2 replies

Dear: I have purchased a TMS320C5505 EVM card which is supplied with CCStudio v3.3. I have downloaded and installed CCStudio v4.x. But...

Dear: I have purchased a TMS320C5505 EVM card which is supplied with CCStudio v3.3. I have downloaded and installed CCStudio v4.x. But now i can't interface my EVM with CCStudio v4.x. To interface the card, first to make a Target Configuration File. In making Target Configuration File, in the "Connection" box list there is no name for my EVM like "Spectrum Digital DSK-E...


C5509 peripherals and 5509 EVM

Started by lfouilhac in TMS320c55x17 years ago

Hi, I am trying to understand the peripherals available on Spectrum Digital EVM : From SD EVM Technical Reference, figure...

Hi, I am trying to understand the peripherals available on Spectrum Digital EVM : From SD EVM Technical Reference, figure 1.1, the McBSP1 is configured as memory stick and the McBSP2 as MMC. Is there any way use the McBSPs as regular serial ports? Tha


Framegraber for TI's EVM

Started by Ging_I in TMS320c55x17 years ago

Hi, I'm trying to build the video system with framegraber and TI EVM board (C55 or C62). The framegraber must be on the PC PCI...

Hi, I'm trying to build the video system with framegraber and TI EVM board (C55 or C62). The framegraber must be on the PC PCI port and interface to EVM via serial port (McBsp). The debugging of DSP will bi via ISA JTAG. The question is how to interface between fra


Need help for EVM C5505 ECG

Started by talh...@yahoo.com in TMS320c55x8 years ago 2 replies

hi, here the detail of my problem: i purchased EVM C5505 and AFE for implementation of ECG. i successfully connected it to pc. the guide...

hi, here the detail of my problem: i purchased EVM C5505 and AFE for implementation of ECG. i successfully connected it to pc. the guide which came with it said to follow the steps for ECG i.e 2. Power on the VC5505 EVM using slide switch SW4. 3. Open Code Composer Studio. 4. Click on Debug ® Connect in Code Composer Studio to connect to the VC5505 EVM. 5. Click on Project ® Open in Co...


c5510 Vs. c5416

Started by Amit Jain in TMS320c55x17 years ago

Hi. I profiled a code on 5416 EVM and 5510 EVM both. Cull code is running from internal memory but the difference in terms of...

Hi. I profiled a code on 5416 EVM and 5510 EVM both. Cull code is running from internal memory but the difference in terms of cycle count is huge and reverse fo what is expected. On 5510evm it takes around 110 MIPS and same code on 5416 evm is talking around 50 MIPS .. this is just o


Evaluation Module for C55X

Started by lfouilhac in TMS320c55x17 years ago 1 reply

Hi, I am looking for an evaluation module for the C55X and the C5502 especially. But so far ,the only EVM I know is the...

Hi, I am looking for an evaluation module for the C55X and the C5502 especially. But so far ,the only EVM I know is the C5509 EVM from Spectrum Digital. Any advice or information would be highly appreciated!


SD 5509 EVM 12-bit Flash Boot

Started by Anonymous in TMS320c55x17 years ago

Does anybody have an interesting approach to booting the Spectrum Digital 5509 EVM from parallel flash considering the fact that...

Does anybody have an interesting approach to booting the Spectrum Digital 5509 EVM from parallel flash considering the fact that the processor only has direct access to 12 address lines during boot. The upper 8 bits require PLD intervention.


Interfacing TLV571 EVM to C5510 DSK

Started by almuaddi in TMS320c55x16 years ago

Hello All, I have the TMS320C5510 DSK board and the TLV571 EVM board. The TLV571 is a A/D daughtercard that can sample up at...

Hello All, I have the TMS320C5510 DSK board and the TLV571 EVM board. The TLV571 is a A/D daughtercard that can sample up at 1.25 MSPS. I would like to interface the two so that I can sample an analog signal and dump the digitized waveform in the 8 MB of external memory provid


Interrupts on TMS320VC5509 EVM

Started by gms_reddy in TMS320c55x17 years ago

Hello, I am working with G.729AB now. I am trying to implement G.729AB with MCBSP interrupts on TMS320VC5509 EVM board (spectrum...

Hello, I am working with G.729AB now. I am trying to implement G.729AB with MCBSP interrupts on TMS320VC5509 EVM board (spectrum digital). When I try to implement with interrupts, the CCS (ver. 2.1) hangs and displays a message like this: Trouble Halting Target CPU: Proce


Sample codes for C5505 EVM

Started by phuo...@gmail.com in TMS320c55x10 years ago

I just bought the EVM C5505 but I could not find any sample code for the MMC/SD and USB in TI website or anywhere else. I tried to compile & run...

I just bought the EVM C5505 but I could not find any sample code for the MMC/SD and USB in TI website or anywhere else. I tried to compile & run the MMC sample from CSL example for C5509 (sprc133) but I doesn't work right. Same thing happens with the USB sample code for C5509A (http://c5000.spectrumdigital.com/evm5509a/files/usbexample/example_usb.html). I can compile & run successfully but nothin...


C5509 Sample Code for USB Module

Started by smiffoz in TMS320c55x12 years ago 1 reply

Dear all, I'm trying to track down some source code examples for configuring USB module on the c5509 device for USB comms with a PC. I...

Dear all, I'm trying to track down some source code examples for configuring USB module on the c5509 device for USB comms with a PC. I asked my local TI tech support contact this question and he pointed me to the following folders under my Code Composer installation: \ti\c5500\evm\host\examples \ti\c5500\evm\target\examples However, these folders do not exist in my code composer...


the available frequency for c55 DSKs

Started by ahma...@yahoo.com in TMS320c55x11 years ago

Hi, Do you know the maximum available frequency for following bords: 1- DSK for tms320vc5510A 2- DSK for tms320vc5509 3- EVM for...

Hi, Do you know the maximum available frequency for following bords: 1- DSK for tms320vc5510A 2- DSK for tms320vc5509 3- EVM for tms320vc5502 for example for tms320c554cst the board frequency is 14.78*8=118MHz while the DSP can work on 120MHz. I mean the 118MHz in above boards. Regards


C55x stack configurations

Started by Padma Ramanathan in TMS320c55x17 years ago

Hi, I am using a C5510 EVM board and I find that the three stack configurations - USE_RETA, NO_RETA and C54x_STK behave in the...

Hi, I am using a C5510 EVM board and I find that the three stack configurations - USE_RETA, NO_RETA and C54x_STK behave in the same manner; i.e, RETA register is not being used and the return address is stored on the stack for all the cases. Another problem is wit


USB mass storage

Started by grzamza in TMS320c55x15 years ago

Hello. I'm trying to implement mass storage class using C5509 processor. Does anyone have any source code examples regarding this...

Hello. I'm trying to implement mass storage class using C5509 processor. Does anyone have any source code examples regarding this problem? There is USBDiskx.lib library supplied with Spectrum Digital EVM board which seems to do what i need and they mentioned that "The USB


Trouble using interrupts on TMS320VC5509 EVM

Started by lars...@gmail.com in TMS320c55x14 years ago

Hi! I'm using timer 0 interrupt to sample data from an external ADC via McBSP1. The problem is that the interrupt routine only runs a...

Hi! I'm using timer 0 interrupt to sample data from an external ADC via McBSP1. The problem is that the interrupt routine only runs a limited number of times and then the program goes out of line. The CCS displays the error message: "Processor communication timeout". I'm also experiencing that variables in the .bss section are being overwritten by some unk


9600hz samplin rate with 5509A EVM

Started by gorkemcipli in TMS320c55x14 years ago

hi what i am trying to do is to generate a modulated signal from my D/A convertor and try to receive it. my numbers to be sent are in Q14...

hi what i am trying to do is to generate a modulated signal from my D/A convertor and try to receive it. my numbers to be sent are in Q14 format i have a TLV320AIC23 and i tried an experiment i printed the numbers to screen that i had send and at the receiver part tried to print the numbers reeceived.normally my aic does not support the 9600Hz samplin rate ho


revision "E" silicon?

Started by mradovic in TMS320c55x17 years ago

Any news on rev "E" silicon or updated errata? Any feedback on coding under the Spectrum Digital EVM board with rev. D? ...

Any news on rev "E" silicon or updated errata? Any feedback on coding under the Spectrum Digital EVM board with rev. D?


MAR

Started by Amit Jain in TMS320c55x17 years ago 1 reply

Hi. I am using c5510 evm board. There are instructuions called mar(TAx+K8) in mnemonics of 55x. I am using mar(AR6 + #1) and...

Hi. I am using c5510 evm board. There are instructuions called mar(TAx+K8) in mnemonics of 55x. I am using mar(AR6 + #1) and compiler says that its an invalid mnemonic. see below . "makeam_pl_reduce_fixed.asm", ERROR! at line 162: [E9999] Syntax Error mar


Example USB code for 5509

Started by Volkar, John in TMS320c55x16 years ago

Anyone out there know of a simple example showing the setup ad use of the USB peripheral on the 5509, preferably in a DSP/BIOS based...

Anyone out there know of a simple example showing the setup ad use of the USB peripheral on the 5509, preferably in a DSP/BIOS based application? I have a Spectrum Digital 5509 EVM, but the Sample project uses a precompiled lib to demo the USB as a general storage device class


McBSP as GPIO

Started by lfouilhac in TMS320c55x17 years ago 1 reply

Hi all, I have configured the McBSP #1 as GPIO (RRST_ = 0 RIOEN = 1). When I read the voltage on that pin (the pin is not...

Hi all, I have configured the McBSP #1 as GPIO (RRST_ = 0 RIOEN = 1). When I read the voltage on that pin (the pin is not connected, working with 5509 EVM from Spectrum Digital), I read 0 but the DSP read a logical 1 If I link the pin to the ground, the DSP sees a 0.