|
hi,
I am developadsp 2181 based motion control
system. I use Visualdsp++2.0 and
218X EZ-ICE. I want set the dsp in nested
interrupt mode. In my program I write 2 insteuction:
icntl=0x0017
nop
But in the register window, the data in icntl
is 07.I try to change icntl directly, but the higher four bit
is still 0.
when the Visual dsp is in simulation mode,
the icntl can change to 0x17. why ?
best regards
Wang Baoliang
|
a question about 2181 ICNTL register
Started by ●May 24, 2002
