Hi,
i have been using a Blackfin 21535 EZKIT with an APEX Emulator do
develop some application in C++.
Now we got our own hardware with BF533 and a JTAG connector. The BF533
seems to run, core voltage comes up as 1.056 V, crystel 8 MHz
oscillating. It does not have any external boot memory, later there will
be serial flash for boot.
The APEX tester application discovers 1 device connected and everything
appears normal. Now i created my own platform in the VisualDSP
Configurator application, but it is not available when i try to create a
new debug session in VisualDSP.
Only the old platform 21535 EZKit appears, which crashes VisualDSP with
the BF533 processor connected.
Anybody has some idea?
Thanks in advance,
D. Teuchert
Reply by Jaime Andres Aranguren Cardona●July 19, 20032003-07-19
Uninstall everything (VDSP++), clean any entries in the registry, which
relate to VDSP++, then install it all again,making sure of installing different
versions in the order they were released.
JaaC
Dieter Teuchert <d...@cadt.de>
wrote:
Hi, i have been using a Blackfin 21535 EZKIT with an APEX
Emulator do develop some application in C++.
Now we got our own
hardware with BF533 and a JTAG connector. The BF533 seems to run, core
voltage comes up as 1.056 V, crystel 8 MHz oscillating. It does not have
any external boot memory, later there will be serial flash for boot.
The APEX tester application discovers 1 device connected and everything
appears normal. Now i created my own platform in the VisualDSP Configurator application, but it is not available when i try to create a new debug session in VisualDSP.
Only the old platform 21535 EZKit
appears, which crashes VisualDSP with the BF533 processor connected. Anybody has some idea?
Thanks in advance, D. Teuchert _____________________________________ Note: If you do a simple "reply"
with
your email client, only the author of this message will receive your answer. You
need to do a "reply all" if you want your answer to be distributed to the entire
group.
_____________________________________ About this
discussion group:
