did someone have written a program for the parallel port (21160 - EZ-
Kit Lite)? I need for introduction a simple programm, which
communicates with the external port, fetches Data from a direct
adress and store it into a SDRAM-Section.
In the manuals there are no example-program I found!
Thank's for your help,
with greetings
Roger Ameis - Heidelberg
Reply by Jaime Andres Aranguren Cardona●July 24, 20032003-07-24
Hello,
Working on new version of the kit? Working on the "parallel" (external)
port of the DSP chip?
If no, but rather working with old version of the kit, and trying to
communicate with PC via parallel port, you can download a sample app in
www.sanjaac.com
Regards,
Jaime
Roger <r...@hotmail.com> wrote:
Hello,
did someone have written a program for the
parallel port (21160 - EZ- Kit Lite)? I need for introduction a simple
programm, which communicates with the external port, fetches Data from a
direct adress and store it into a SDRAM-Section. In the manuals
there are no example-program I found!
Thank's for your help, with greetings
Roger Ameis -
Heidelberg_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group: