|
What I'm trying to do is use multichannel to separate out the left
and right data from an AD73322L CODEC that produces a frame sync pulse on every sample. I would like to set the multichannel mode to put the first sample in one buffer and the second in another buffer but from the manual it appears that the frame sync pulse is used to indicate the first channel and then there shouldn't be any more frame sync pulses until all channels are transferred. If I program the multichannel mode for two channels, will it ignore the second frame sync pulse or will it put all data in the first time slot because I get another frame pulse. Thanks |
SHARC ADSP-21065L Multichannel Mode
Started by ●September 19, 2003
