> hi! > can any one who worked > on adsp sharc21065l can give me > guideline how can i start programming. > vdsp is 3.5. > with regards > zhyanki > Hi Zhyanki, look into samples directory in VDSP distribution. If you want to do audio processing, start with talkthru example. If you have EZ-Lite evaluation board, you can run examples on that board, which will be of great benefit for you. Search for additional help at www.analog.com , if necessary. They have lots of information for you. Good luck Bernhard Holzmayer |
|
AW: programming
Started by ●September 6, 2004
Reply by ●September 6, 20042004-09-06
Moreover, the "Using the Low Cost ADSP-21065 for Audio Processing" (or so named document) will be of great help to you, I think. You can find it on the Technical Library section on www.analog.com/sharc JaaC --- Bernhard Holzmayer <> wrote: > > > hi! > > can any one who worked > > on adsp sharc21065l can give me > > guideline how can i start programming. > > vdsp is 3.5. > > with regards > > zhyanki > > > Hi Zhyanki, > > look into samples directory in VDSP distribution. > If you want to do audio processing, start with > talkthru example. > > If you have EZ-Lite evaluation board, you can run > examples on that board, > which will be of great benefit for you. > > Search for additional help at www.analog.com , if > necessary. > They have lots of information for you. > > Good luck > Bernhard Holzmayer > > _____________________________________ > Note: If you do a simple "reply" with your email > client, only the author of this message will receive > your answer. You need to do a "reply all" if you > want your answer to be distributed to the entire > group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > To Post: Send an email to > > To Leave: Send an email to > Archives: http://groups.yahoo.com/group/adsp > > Other Groups: http://www.dsprelated.com/groups.php3 > > Yahoo! Groups Links > > ===== Jaime Andr Aranguren Cardona __________________________________ |