Hi,
Thanks,
I would like to know how i can make a call to assembly routine from C program
can you give some idea or any links or docs - ADSP21160
please
Thanks
Harsha S
On Mon, 28 Mar 2005 Mike Rosing wrote :
>On Sun, 28 Mar 2005, harsha sb sb wrote:
>
> > I am working on the ADSP-21160 board, I have one PCIDSP board in which
3 ADSP-21160 are embedded,there is host communication to this processors via a
PCI bus, so my input is comming through the PCI bus and is stored in the
internal memory.
> > I have a memory SDRAM of 64MB.
> > 1. My question is how i can make this external memory 64MB as a shared
memory to all the 3 processors,presently this SDRAM memory is mapped to
0x1800000 address.
> > 2. IS there any best method so that i can transfer my input the
external memory. easilly becouse i have the data of 60MB to operate.
>
>Hello Harsha,
>
>The problem with allowing all processors access to the same memory is bus
>contention. You have to ensure that only one processor has the bus at
a
>time. You can do that by using the built in br (bus request)
lines. You
>can do it with a CPLD that prevents bus access by multiple devices using
>the ack line to insert wait states. You could get really fancy and
use
>dual ported ram and an fpga so each processor doesn't see the sdram as
a
>bottle neck too, but that gets really expensive and time consuming.
>
>Look at the system architecture chapter in the 21160 manual. It will
give
>you lots of good ideas.
>
>Patience, persistence, truth,
>Dr. mike
>
Hi how to calla assembly routine from C
>I would like to know how i can make a call to assembly routine from C
>program can you give some idea or any links or docs - ADSP21160
Check out the ADI C Tools Manual. Also check out EE-120 on this page:
http://www.analog.com/processors/processors/sharc/technicalLibrary/
Patience, persistence, truth,
Dr. mike
Hi,
Can you tell what exactly function of the *.sm files(Shared memory files)
like.
I am getting comnfused .
is this file is used to share the same exe file to all the processor onnected in
parelle or anything else
Please can you give some documnet link of more detailed of shared memory file
..
thanks
Harsha S
On Tue, 29 Mar 2005 Mike Rosing wrote :
>
>On Mon, 29 Mar 2005, harsha sb sb wrote:
>
> >I would like to know how i can make a call to assembly routine from
C
> >program can you give some idea or any links or docs - ADSP21160
>
>Check out the ADI C Tools Manual. Also check out EE-120 on this
page:
>http://www.analog.com/processors/processors/sharc/technicalLibrary/
>
>Patience, persistence, truth,
>Dr. mike
><*> To visit your group on the web, go to:
> http://groups.yahoo.com/group/adsp/
>
><*> To unsubscribe from this group, send an email to:
> a...@yahoogroups.com
>
><*
>
>
Manual for SHARC DSPs, which you can download from
www.analog.com/dsp
Regards.
--- harsha sb sb <harsha_sb@hars...> wrote:
> Hi,
>
> Thanks,
>
> I would like to know how i can make a call to
> assembly routine from C program can you give some
> idea or any links or docs - ADSP21160
Jaime Andr Aranguren Cardona
jaime.aranguren@jaim...
jaime.aranguren@jaim...
__________________________________