Hi,
I am using BF533 in my board. If i am going to boot the board it is
going to supervisor mode and sometimes i feel it is going to sleep
mode and the SPORT is not working?. Can anybody help me out why the
processor is going to Sleep mode.
Thanks in Advance
Thalesh.R
Reg.Blackfin mode problem
Started by ●July 26, 2005
Reply by ●July 27, 20052005-07-27
the kit is extremely sensitive and the idde shuts down at the
slightest opportunity!
check if your ports are configured properly
if you re not using the ports.. working on simulator for a while and
then switching back to emulator could help
On 7/26/05, rumithal143 <rumithal143@rumi...> wrote:
> Hi,
> I am using BF533 in my board. If i am going to boot the board it is
> going to supervisor mode and sometimes i feel it is going to sleep
> mode and the SPORT is not working?. Can anybody help me out why the
> processor is going to Sleep mode. > Thanks in Advance
>
> Thalesh.R >
slightest opportunity!
check if your ports are configured properly
if you re not using the ports.. working on simulator for a while and
then switching back to emulator could help
On 7/26/05, rumithal143 <rumithal143@rumi...> wrote:
> Hi,
> I am using BF533 in my board. If i am going to boot the board it is
> going to supervisor mode and sometimes i feel it is going to sleep
> mode and the SPORT is not working?. Can anybody help me out why the
> processor is going to Sleep mode. > Thanks in Advance
>
> Thalesh.R >
