Hallo! I am trying to get started with my new ADSP-21160-EZ-KIT Lite. I have tried to create a new project file (the example project primex.dbj in the User Guide), including "def21160.h" in the Primex.c file, and ezlab21160.ldf, ezlab21160_hdr.doj, hhezl_alib.dlb in the project. But when I try to build the project this is the error message I see: ------------------- "C:\Programmi\Analog Devices\VisualDSP\cc21k" -c .\Primex.c -g -21160 -o .\debug\Primex.doj "C:\Programmi\Analog Devices\VisualDSP\cc21k.exe" "C:\Programmi\Analog Devices\VisualDSP\EzKit21160\etc\ezlab21160_hdr.doj" .\debug\Primex.doj -flags-link "C:\Programmi\Analog Devices\VisualDSP\EzKit21160\lib\hhezl_alib.dlb" -T "C:\Programmi\Analog Devices\VisualDSP\EzKit21160\etc\ezlab21160.ldf" -21160 -L .\debug -o .\debug\primex.dxe [Error E4300] Demo License error: total Program Memory size cannot be more than 21K word for ADSP-21160 [Error E1539] The memory layout specified in linker description file is invalid Linker finished with 2 error(s) 0 warning(s) cc21k: Fatal Error: Link failed Tool failed with exit/exception code: 1. Build was unsuccessful.), ------------------- What's the problem ? Thanks in advance! ______________________________________________________________________ |
|
ADSP-21160-EZ-KIT Lite: getting started
Started by ●May 23, 2001
Reply by ●May 24, 20012001-05-24
Hi The VDSP++ spftware for the ADSP-21160 EZ_KIT is limited in terms of the amount of program code memory that you are allowed to use (as well as the target board type!) I think they allow only half of the program code memory space to be used. Unfortunately, they included .LDF files which specify more program code memory than they allow for, probably an oversight on their part. This can be easily fixed by opening the project .LDF file and decreasing the amount of memory used by the seg_pmco segment until it compiles. As far as I am aware, all of the demo programs that they provide will compile with the reduced seg_pmco segment size. Cheers, Clifford Jack Galanda wrote: > Hallo! > I am trying to get started with my new > ADSP-21160-EZ-KIT Lite. > I have tried to create a new project file (the example > project primex.dbj in the User Guide), including > "def21160.h" in the Primex.c file, and ezlab21160.ldf, > ezlab21160_hdr.doj, hhezl_alib.dlb in the project. > But when I try to build the project this is the error > message I see: > > ------------------- > > "C:\Programmi\Analog Devices\VisualDSP\cc21k" -c > .\Primex.c -g -21160 -o .\debug\Primex.doj > "C:\Programmi\Analog Devices\VisualDSP\cc21k.exe" > "C:\Programmi\Analog > Devices\VisualDSP\EzKit21160\etc\ezlab21160_hdr.doj" > .\debug\Primex.doj -flags-link "C:\Programmi\Analog > Devices\VisualDSP\EzKit21160\lib\hhezl_alib.dlb" -T > "C:\Programmi\Analog > Devices\VisualDSP\EzKit21160\etc\ezlab21160.ldf" > -21160 -L .\debug -o .\debug\primex.dxe > [Error E4300] Demo License error: total Program > Memory size cannot be more than 21K word for > ADSP-21160 > [Error E1539] The memory layout specified in linker > description file is invalid > Linker finished with 2 error(s) 0 warning(s) > cc21k: Fatal Error: Link failed > Tool failed with exit/exception code: 1. > Build was unsuccessful.), > > ------------------- > > What's the problem ? > Thanks in advance! > > ______________________________________________________________________ > > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://groups.yahoo.com/group/adsp > > Other Groups: http://www.dsprelated.com/groups.php3 > ">http://docs.yahoo.com/info/terms/ | |||||||
|